Why does the toilet water go down slowly, but the poop can t go down

Because the toilet is blocked by a foreign object, not sealed by a foreign body, you think, if you make a water bag, there is a small hole in it, and it will deflate after a few hours, and this is why the water can't be flushed, but it will flow down slowly, and the big reason why it can't be flushed is because the water pressure on it is not enough, and one can dredge the pipe, and another way is to pour a bucket of water down to increase the water pressure.

First of all, what you need to do is to pay attention to the things that are flushed down the toilet, and it is best to pay attention to them, such as long hair, which is best avoided. Because the long hair will get tangled around other things, wrap up in a big ball, and if it's too big, it will block the toilet. Therefore, if you can avoid it, the toilet will not be so easy to clogg. >>>More

"Whether the toilet is spilled or not", many people consider this issue when buying a toilet. No one wants PP to be splashed with water at a convenient time, which is an unpleasant thing both from a hygienic and psychological point of view. So is there a toilet that can prevent the "spilling incident" from happening? >>>More

The squat toilet is changed to a flush toilet, and if the waterproof is not burned after the change, it will cause water leakage downstairs. To change the rock movement, it is necessary to know that Duan Yu needs to change the water pipe, to raise the water pipe to the plane level of the floor tiles, to open the ground for maintenance, and to do a good job of waterproofing around the pipe again.

There is a reverse bend inside the toilet, which has a long-term storage of water to seal the outlet, which is used to block the odor in the sewer pipe, some toilets have original design, the water in the toilet must be higher than the height of the outlet of the back bend before the water will flow away, the method of measuring the height of the back bend is to slowly put water into the toilet, when the water surface is no longer tall, the height of the water surface is the height of the water outlet, if the water discharge speed is accelerated, the inertia generated by the water flow will cause the pipe to produce negative pressure, suck away the water in the toilet, the higher the speed, the more it will be sucked. Now the toilet tank is integrated with the toilet, and the water velocity is certain, the water flow speed can not be increased by increasing the height of the water tank, and the water tank can only be increased by increasing the height of the water supply level valve in the water tank, and the solution can be installed by tilting the toilet back a little, and the height of the outlet of the anti-bend can be reduced to solve the problem of too high water in the toilet, but do not tilt too much, it is not beautiful to be too large, it is inconvenient to use, and there is that it will be invalid after being lower than the height of the anti-water elixir, and the smell will come out.