-
Anonymous users2024-01-24The waterproof project of the bathroom is very critical, in the home decoration, in order to avoid the leakage of the bathroom, the interior decoration of the bathroom must be improved. This is not only related to the convenience of people in the future, if it is not done well, it will also leak and endanger the condition of the next-door neighbor, etc., resulting in the inconvenience of having to renovate again, and people must make it waterproof to ensure that the bathroom leaks.
Brush waterproof architectural paints: Before people brush latex paint, they should ensure that the bathroom is clean and dry. Waterproof architectural coatings should be brushed in all directions, and the rural grassroots are integrated and solid, and there can be no bubbles, falling and other problems.
When people paint, they should first paint from the bottom above all else, first the wall and then the ground. In general, the waterproofing of the bathroom can be guaranteed to be 180 cm, and the waterproofing of the wall of the non-shower room cannot be less than 35 cm.
Closed water test: Before doing the closed water test, all the drainage in the bathroom can be plugged, and a simple 25 cm high threshold can be made at the entrance of the bathroom, the bathroom is sealed, and then the bathroom can be filled with 20 cm of water. Be sure to store for 24 hours to test the water filling status, if the water is not leaking, it can be regarded as a passing toilet waterproof project.
To maintain smooth drainage: Toilet drains, including odor-proof floor drains, sewer pipes for sanitary ware, etc., must be removed immediately to prevent blockages. Only in this way can we prevent the occurrence of the tragedy of the "flooded Seventh Army" in many ways.
Pipeline: bathroom pipeline construction, not only to consider the hot and cold pipes of the electric water heater, but also to take into account the water supply and drainage problems of household appliances such as automatic washing machines.
-
Anonymous users2024-01-23To find professional construction personnel, regular manufacturers of waterproof materials, waterproof to release water for 24 hours after waterproofing.
-
Anonymous users2024-01-22If you want the waterproof system of the bathroom to do well, the installation of the floor drain cannot be ignored, and you should choose the kind that is strong and has good performance.
-
Anonymous users2024-01-21It is best to look at the waterproofing when the decoration is waterproofed, and the waterproof material should be of better quality
-
Anonymous users2024-01-20The waterproof material must be good, after all, it must be used by yourself to eliminate potential safety hazards.
-
Anonymous users2024-01-19Do dry and wet separation, now the decoration will consider this problem, needless to say that the decoration company knows.
-
Anonymous users2024-01-18If you want to avoid water leakage, you have to solve the fundamental problem. Pay attention to the timely switch when using the faucet again. No water is wasted.
-
Anonymous users2024-01-17Special attention should be paid to the waterproof project, the mix ratio of waterproof coating and cement must be paid attention to, and another bricklayer with good skills should be found.
-
Anonymous users2024-01-16After using the water, turn off the faucet in time, and the bathroom should be waterproof.
Renovation of old houses, or rough houses?
The old house should first remove the original tiles, apply waterproof glue, and paste waterproof cloth. Reapply the paint. Fill with water, 24 hours, no leakage. Drain the water and dry the ground. tiling. >>>More
Bathroom
Waterproof practices >>>More
Generally, the bathroom in Hefei market is 30 cm high on the ground, and the wall of the shower is brushed with rice. Then do a closed water test, if it leaks, you have to re-brush, if it doesn't leak, you can arrange the next step. >>>More
1. Bathroom waterproof construction steps.
Step 1: You can use a slightly coarser cement to base the foundation first, and then brush the waterproof paint after the cement is dry. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More
Clean the base surface first, and then rinse it with water, the cleaner the base surface treatment, the better, after the base surface is done, then use the plugging king to plug the sewer pipe, floor drain pipe and other nozzles around the leakage treatment, if possible, then use polyurethane, or acrylic to paint the periphery of the nozzle, this process is done after drying. Then use cement mortar to level, the yin corner should be made into a garden corner, and after the leveling layer is dry, you can directly do waterproof construction. It should be noted when painting waterproof coatings, because most of the coatings are two-component, first mix the powder and liquid materials according to the proportion of the instructions for use, and then paint, first match half of the material, because do the brushing twice, the material should also be mixed twice, the mixed material should be used up at one time, it is strictly forbidden to add water to dilute it halfway, wait until the first time to dry and then paint the second time, the direction of the second brush should be perpendicular to the first time, so that the painting will be more even, will not miss the coating, and the waterproof on the wall should be meter high. This can prevent the tide from infiltrating into the next room, after the waterproofing is done, outsiders are prohibited from stepping on it, protect the waterproof layer, and pay attention to the protection of the waterproof layer when the next construction sequence, and if possible, you can also do a layer of cement mortar protective layer.