-
Anonymous users2024-01-24Of course! It is possible to use solid shield concrete waterproof protective agent solid shield concrete permanent setting liquid DPS!
Functional characteristics of solid shield concrete waterproof protective agent:
For concrete reinforcement, increase the strength by 20-30.
Prevents concrete from drying and cracking, and automatically seals the following cracks.
It can adapt to the waterproof surface of the backwater, and has the performance of secondary impermeability and self-repair.
Anti-corrosion, anti-weathering, dust-proof, anti-fouling, anti-mildew.
Simple construction: no need to do screeding, spray directly on the concrete surface.
No increase in load, reduction of structural costs.
All-weather construction, both dry and wet construction, no special maintenance is required.
Cost savings. It can be done in a single spray.
-
Anonymous users2024-01-23I guess there is a leak in your bathroom, right?
This depends on what the leakage is, and it is generally treated from the backfill grouting downstairs.
If the water source leaks from the gap in the tile, it can be sprayed with inorganic permeable transparent waterproofing agent, which is generally rarely done, mainly because the water source is not known for leakage.
Both of the above are without the need to destroy the original finishing layer.
-
Anonymous users2024-01-22Have you renovated? If you install it, you have to destroy the ground, and if you don't, it's easy to do.
Like JS polyurethane polypropylene can be.
-
Anonymous users2024-01-21The downstairs owner of my house is the bathroom and the kitchen is separated by the wall leakage and the wall socket leakage, the wall is the main wall of the cement wall, downstairs to find us many times said that it is my home leakage, last year my bathroom was leaking once but it is also against the root of the wall but do not understand, just look for a mason to repair the ground, but did not see whether the waterproof has been damaged, but the roof downstairs is dry, where does the water from the socket come from, how should we deal with this situation? 、
If the floor is not damaged, the waterproofing effect of the bathroom is very good, and it is okay to do partial waterproofing now. However, don't pay attention to the new waterproof coating must overlap with the original waterproof coating with a width of 10cm, so that the new and old waterproof layers form an overall airtight waterproof layer. >>>More
Plugging leaks in the bathroom will have local wounds. If the leakage is not very serious and the leakage point can be found, knock off the cement layer and plug it with the plugging king. It will not affect the aesthetics of the decoration. >>>More
It depends on how you did the original waterproofing to decide if you need to do it all over! Provide free professional technical consultation for concrete waterproof leakage repair.
When punching holes in the bathroom, it is necessary to fully consider the waterproof problem - after the holes are drilled and installed, the damaged waterproof layer must be connected.
If the ground is leaking alone. Okay, Duan Min, you have to check where the water is leaking, for example, the water pipe is leaking and it is going to knock on the ground. If it is a bathroom, there is no friend branch to do waterproofing before. You can also use a combustible transparent waterproof paint brush on top of the tile to repel the water.