The lock of my house s security door was twisted by a relative, and it turned out that it could not

The lock of my house's security door was twisted by a relative, and it turned out that it could not be unscrewed again, so please help

The lock of my house's anti-theft door was twisted by Qi Hu, the result of which it could not be unscrewed again, please ask for help, the lock cylinder does not turn because there is a problem with the lock cylinder. The solution is as follows: 1. Check whether the anti-theft door key is correct and whether the anti-theft door key and lock are damaged.

2. The anti-theft door key is not in a good position when inserted into it, and some of it is caused by the dislocation of the lock cylinder, you can press the keyhole with your hand, and the other can play a hand and then move the key to try it. 3. The lock cylinder is astringent, the key and the bullet are stuck, at this time, use universal lubrication rust remover to spray into the lock hole, move the key, and then try to turn.

If the lock of your security door has been twisted by a relative and the result is that it can no longer be unscrewed, you can try the following methods:

1.Try using a key: Try inserting the key into the lock hole and turning the key to see if you can open the lock. If the key can be rotated, the door lock is not damaged, and you can try using the key to open the door lock.

2.Try using the emergency key for your door lock: If you have an emergency key for your door lock, try using the emergency key to insert it into the lock slot and then turn the key to see if you can open the lock.

If you don't have an emergency key, you can contact the lockpicking company or property company and ask them to provide the emergency key.

3.Contact a lockpicking company: If you can't use a key or emergency key to open the lock, you can contact a lockpicking company and have them provide professional lockpicking services.

4.Contact the property company: If you can't use the key or emergency key to unlock the door, you can contact the property company and ask them to provide a professional unlocking service.

In short, if you can't open the door lock, you can try the above methods, if you still can't open the door lock, it is recommended that you contact the lock company or property company, let them provide professional lock picking services.

Help. The lock of my house's security door was twisted by a relative.,As a result, I can't open it anymore.,Ask for help.,What should I do in this situation.,Now the red point can't be moved.。

The lock of my house's security door was twisted by a relative, and it turned out that it could not be unscrewed again, so please help

Hello dear, I'm glad to answer for you, <>

The lock of my house's anti-theft door was twisted by a relative, and the result can no longer be unscrewed, ask for help Ah answer First of all, the decoration company changed the lock without permission and violated your property rights, but because there is a contract between you, it has the right to enter legally, and it does not involve breaking the law. As for the renovation contract between the two parties, you can claim to terminate it (depending on the content of the contract). 1 Generally speaking, the key can not be screwed is not in a good position, some are caused by the dislocation of the lock cylinder, when the lock cylinder appears outward after returning to the position, you can press it down with your hand, and the other hand can move the key on it First, the key can not be screwed, probably because of the impatience and did not dismantle the position of the lock cylinder.

It is recommended to pull out the key and insert it back in. Second, the lock can't be screwed, which may be the dislocation of the lock cylinder of the anti-theft lock. If this is the case, wait for the lock cylinder to return to its position, press down the part of the lock cylinder that emerges outward, the key can be pulled out, and the lock can be twisted and rolled into the air.

Third, if the lock cylinder is astringent, or the key and the cylinder are stuck, you can use lubricating oil to drip into the lock cylinder to remove the rust stains on the lock cylinder, and then move the key. Fourth, you can also pour pencil ink into the lock cylinder, and then try to turn the key to see if the key can turn normally. Fifth, if none of the above methods can make the lock twist smoothly, it is recommended to find an anti-theft lock maintenance master to deal with it.

The lock of my house's security door was twisted by a relative, and it turned out that it could not be unscrewed again, so please help

The lock of my house's security door was twisted by a relative, and it turned out that it could not be unscrewed again. Hello, happy to answer your <>

The lock of the anti-theft door of my house was twisted by relatives, and the result can no longer be unscrewed as follows: 1. Why does the lock not move 1. If the lock does not move, we need to check whether the key of the anti-theft door is matched, or whether the key and the lock are damaged. 2. There is also a situation that will cause the lock to be unscrewed, and it is not aligned with the position after insertion, or the lock cylinder has been dislocated, we can press and hold the keyhole with our hands, and then move the key to pick up the wide key and try again.

3. Sometimes because the key and lock are stuck, it will also lead to the situation that the lock cannot be screwed. 2. How to solve the problem that the lock cannot be screwed 1. If the key selected is incorrect, or the lock itself has a problem, it will definitely not be screwed at this time, so we can replace the key or replace the lock cylinder. 2. Sometimes the lock has been dislocated, you can spray the lubricating rust remover into the lock hole, and then we will screw the key after lubrication to see if it can be turned.

If it doesn't work, you can only replace the lock cylinder with a new one, and even the key must be replaced at the same time to solve the problem. 3. How to maintain the use of the anti-theft door 1. When we usually use the anti-theft door, if the key is not fully inserted and brute force cannot be used, there may be stains inside, and the foreign body needs to be taken out, and the lock must be cleaned up after a period of use, so as to protect the anti-theft lock. 2. When opening and closing the door, if you hear the sound of friction, you can drip lubricating oil into the hinge or hinge to let the lubricating oil penetrate into the hinge, which can also reduce the sound of friction.

Hope mine can help you <>

Do you have any other questions?