-
Go slower and rotate at a higher point, the main thing is that the knife is not good, and the tungsten steel spiral knife to be solved is absolutely OK, and it is absolutely OK to use it if it is not good.
The main thing is to use a good knife to make a good job.
-
If it is not said that some small knives can't get in, generally 6 centimeters is more appropriate, the speed is the highest, and the feed is slower.
-
Rotate faster, slower speed. You can change the knife to a better one.
-
Don't go too fast with a 6mm knife and you should be fine.
No, there are a few stalls to hold up.
The weight of this plank is equal to its volume multiplied by its density. The density varies depending on the tree species. In general, the average density of wood is about grams per cubic centimeter. >>>More
Priority front baffle thickness,Then consider others,8Inch bass,If the unit is relatively high-end,With 4 cm of solid wood planks will not be too thick,If the unit is relatively low-end,Or the power is relatively small,It is a little too heavy and wasteful,The internal space volume of the speaker is best to refer to the parameters of the speaker unit for reasonable calculation,It is better to use the computer to simulate the design。 It is recommended to choose a solid wood board with a relatively uniform wood grain density, and do not choose a board that is easy to crack and too rough.
1 m 4 = 140 cm, 2 m 43 = 243 cm, volume = 14X140X243 = 476280 cubic cm.
Don't you want to cut your own wood and make your own flooring? Tough!!!