-
Anonymous users2024-01-24The best thing to do is to take it apart to dry the surface and floor, and then assemble it.
-
Anonymous users2024-01-23We have conducted water soaking experiments on a variety of hot-selling laminate flooring, and most of the products cannot be completely restored to their original state even after being fully dried after soaking in water, and will be deformed to some extent.
For the situation of your home, you must remove the soaked floor and put it in the ventilation to let it dry completely, if you soak the substrate like this, it will definitely rot and the floor will not be usable. I don't know what brand your floor is, what is the quality, you can put it back to try after two or three days of drying, if the quality of the floor is good, the deformation should not be too large, the floor can continue to be used, if the deformation is particularly serious, the substrate is cracked, it is recommended that you replace the new floor from the new.
The ground of the wooden floor, with ceramic tiles as the background wall, this is OK, but the color of the tile should be selected first, followed by the choice of pattern, you can choose imitation wood grain tiles, or color Solid stone grain tiles with deep texture, as shown below.
(1) Large area of soaking water: contact the manufacturer in time when cleaning up the stagnant water on site. >>>More
Nylon is cheap and easy to clean; The cotton ones are of high grade, but they are more expensive and not as easy to wash as nylon. It depends on the decoration style. >>>More
OK. Now the mainstream reinforcement is all locked, and the bottom is flat.
The living room walks back and forth more, and it is recommended that the tiles are good (not afraid of moisture, wear-resistant, and there is more moisture in the air on the upper floors on humid days).