-
Anonymous users2024-01-24Rivets are one-time use products. You can only take those two hats out by grinding them off. In addition, that square iron can be pulled out.
Usually when the aluminum alloy is too thin, the strength of the threaded connection is too low, and the connection strength can be greatly improved by using rivets or rivet nuts. Rivet nuts can be easily removed using threaded connections, but the cost is prohibitive. Pull rivets are inexpensive and the strength can be guaranteed, but they are not convenient to disassemble.
It is convenient if there is an angle grinder. It is recommended to buy professional tools and operate professionally.
-
Anonymous users2024-01-231: Use a hand drill to drill off the rivet head, 2: Cut off the rivet head with a screwdriver.
Then replace it with a rivet.
-
Anonymous users2024-01-22Choose a twist drill bit that is slightly larger than the diameter of the rivet, and drill off the edge of the rivet with a hand electric drill, and the rivet can be taken out.
After the lock cylinder is removed, the lock spring comes out.
Take the wishful charm. Right-click on the wishful charm to pick up any furniture in your home and put it in your bag.
Quzhou Qujiang District Xiaotian Lock provides Qujiang area car anti-theft door emergency unlocking, lock maintenance services.
Before installing the hook, wet the working surface with water, and then stick the hook upward, so that under the action of water, the hook will stick tightly to the wall, as long as it does not hang heavy things, it can last for a long time. But it will still fall after a long time.
Punching – gently hammering in a screwdriver – can be wrung out.