-
Anonymous users2024-01-24If the upper and lower width of the door leaf is not the same, resulting in the door cannot be closed or the upper and lower door gaps are not wide, the analysis is as follows:
If it is a small cabinet kitchen door, consider whether the hinge is loose. (Hinge adjustable) If it is the entrance door, the hinge can also be adjusted by tiptoe with a piece of paper.
If the upper and lower dimensions of the door leaf itself are different, it is recommended to remove the wide part and repaint. (It's a pity to throw away, save costs, if you are a tyrant, ignore).
If the difference between the upper and lower dimensions is not obvious, you can make some articles on the door frame. (Installation carpenters will deal with it) hope it will be useful to you!
-
Anonymous users2024-01-23Ask the master carpenter to make a new one.
Narrow position cabinets can be appropriately narrowed, with the space to customize the cabinet.
If the construction unit does not care, can only solve it by itself, I suggest to make a row of wardrobes in the master bedroom, to the top of the wardrobe frame, wardrobe door customization, strong and good-looking, but also save money, but also the bedroom of the fault block, is to do the trouble point, can not be unified blanking.
It can be replaced with a single sliding door, so that the space will be much larger, of course, it means that the interior is empty. >>>More
Around the wall, use wooden strips, the top is fixed with Peng Chang hook, and the wire is fixed, and the lamps are also installed. That's it.
Take a hammer and smash it, and change it to a bigger one.