Custom made furniture materials

Solid wood planks, pine are ok. Like us, whether it is decorating or wanting to give away, or getting married, there are pine furniture. It doesn't have to be Beijing, if you want Beijing, it is recommended that you find furniture to customize a set of dragons, which is trouble-free.

Plate is the main component of custom furniture materials, its quality directly determines the quality of the product, the furniture on the market is mainly made of plywood, particle board, fiberboard, and fiberboard by high-density, medium-density, low-density, the following is a brief introduction and analysis of commonly used furniture (mainly wardrobe) plates.

1. Composite solid wood, moisture-proof board, solid wood paint-free board.

It is moisture-proof, environmentally friendly, and cost-effective. The national wardrobe products have gone through more than ten years of development, more than ten years of experience is enough to conclude that the wardrobe with moisture-proof board is the best choice! The high quality of the wardrobe's moisture-proof panels can be used in heavily humid environments.

Due to the brittleness of the board surface, the requirements for production equipment are higher. Now the wall of the new home has been decorated and painted, and the wall will have a small amount of water, and after the installation of the overall wardrobe, it cannot be ventilated, and the back part of the wardrobe needs a board with better moisture resistance. The moisture-proof board is soaked in water, because of the long wooden fiber, plus the green moisture-proof agent, the soaking expansion to a certain extent will no longer expand, so most brands of wardrobes use the moisture-proof board as the main material of the cabinet, which has a certain reason.

2. Particleboard and MDF.

MDF, also known as MDF, is pressed and formed by wood flour, with better flatness, more suitable for milling and molding, and is usually used for modeling door panels, such as baking paint and molding (blister). In addition, the MDF material is softer, and it is not easy to burst the edge when banding, and it is easier to process, so many small factories use medium tire. In terms of moisture-proof performance, the moisture-proof performance of particleboard is much worse than that of moisture-proof board, and there is less green core moisture-proof agent, and if it is in a humid environment for a long time, the wood is prone to mildew and decay.

3. Low-cost production of particleboard.

Most small manufacturers consider the cost, generally use particleboard (i.e., solid wood particle board), use ordinary glue, and the cost is the lowest among the three materials.

Fourth, the ecological board.

Large core board or sandwich board plus double-sided paste trimer surface! Quality: sandwich board (commonly known as blockboard, woodworking board) is a plywood with a solid wood core, it will cut the log into strips, spliced into a core, the outer veneer material is processed, the force of the whole board comes from the thin two layers of outer veneer, the middle is the wood block splicing, the substrate is basically not forced, it is easy to break and deform.

Most of this kind of board is made of fir wood of one or two years as raw material, and the wood can be broken with only your fingers, and the nail holding force is several times lower than the national standard.

Melamine veneer (triamine board).