-
Anonymous users2024-01-24Not necessarily.
There are two possible reasons for the weak flushing of the toilet: 1. There is a problem with the installation of the sewer pipe, 2. There is a blockage in the water pipe, 3. The water pressure of the water tank is not enough.
First of all, you can take half a bucket of water to manually flush to test the flushing effect, if you can't flush the main reason is blockage or sewage pipe problems.
If this is the case at the beginning, it is estimated that you have bought a siphon toilet, and it may have been displaced because of the inappropriate hole spacing; Or there are two reverse bends, one for the toilet and one for the sewer pipe.
If it is because it is a long time later, it may be that the sewer pipe is not good, it may be blocked, or there is dirt in the tank and needs to be cleaned; Another possibility is that the pipes are not glazed and the pipes are clogged due to long-term fouling.
If the first two problems are not the first two problems, you can adjust the flush button thimble to fully reach the stroke of the button press, or increase the flushing volume of the inlet valve and drain valve (to remove the water tank for adjustment).
-
Anonymous users2024-01-23It is also related to the internal structure of the toilet, and the flush pipe fittings are also a major factor.
If the toilet is like this at the beginning, it may have been displaced because the hole spacing was not suitable; If it is because it is a long time later, it may be that the sewer pipe is not good, it may be blocked, or there is dirt in the tank and needs to be cleaned; Another possibility is that the pipes are not glazed and the pipes are clogged due to long-term fouling.
According to the past few days on the Internet many checks, did not find a reliable way, at first thought that the pipe was blocked, and then knew that the sealing ring leaked, so there is no force in the water, here is a simple way to share with friends who need: "Close the water valve, that is, the water pipe that supplies water to the toilet, turn off the toilet to cut off the water, and then press the flush button of the toilet, let the toilet empty water flush once, and the toilet can generally return to normal" If the above methods are useless, you can only report for repair.
Influential.
The cistern fitting is the drain driving hardware of the toilet bowl and largely determines the flushing capacity of the toilet. >>>More
That is to adjust the height of the inlet valve ball, the flushing is weak, the new is the water level problem, the old is that the outlet is blocked, and only a part of the water comes out.
When pressing, there will be a plastic plug in the water outlet to leave the water outlet, and the water will rush out from there, and when you let go, the plug will fall and block the outlet, and the water will not flow out. The basic principle of the flush toilet is to use the gravity of the water to convert the potential energy of the water into the kinetic energy of the water, so as to carry the excrement into the sewer pipe. Toilet flush method.