-
Anonymous users2024-01-24There are many reasons for this, the water level of the tank is too high, and water flows into the toilet through the overflow pipe. Adjust the water level to select the required flush volume, but the maximum water level height should be more than 15mm below the overflow nozzle.
The ejector rod is too long, and the water tank cover presses the ejector rod so that the overflow pipe is lifted a little; The zipper adjustment is too short or knotted. Adjust the ejector rod screw appropriately short; The zipper should be lengthened or straightened appropriately.
Debris accumulates on the water sealing line of the base. Please clean up.
The drain tie rod is not in a suitable position. Hook the drain tie rod to the appropriate hole in the overflow pipe.
The sealing ring of the flap is deformed, the sealing ring of the drain valve is swollen and damaged, and the sealing line of the base is bumped and damaged. Replace the flap seal, drain valve seal, and base.
If it really doesn't work, it is recommended that you can find a professional to help you repair it.
-
Anonymous users2024-01-23It is caused by the aging of the water seal in the water tank, so find a professional to repair it. There is also a possibility that there is a foreign body in the water seal area.
-
Anonymous users2024-01-22Your toilet is absolutely broken.
-
Anonymous users2024-01-21The water tank sanitary ware is aged and replaced.
-
Anonymous users2024-01-20Leaking water in the tank.
-
Anonymous users2024-01-19Check whether the plug of the water tank is cracked or deformed, which may affect the water storage function.
-
Anonymous users2024-01-18It is recommended to change the piston, and pay attention to the length of the line must be mastered!! How not, change the toilet!!
-
Anonymous users2024-01-17After a long time, the piston is deformed.
-
Anonymous users2024-01-16The piston is loose and needs to be replaced.
-
Anonymous users2024-01-15Start by pouring a little bit of dish soap to clean the limescale in the tank.
-
Anonymous users2024-01-14Because the toilet spout is too large.
-
Anonymous users2024-01-13The piston is not plugged tightly!!
-
Anonymous users2024-01-12There is a problem with the switch of the flush, so it is recommended to repair it.
-
Anonymous users2024-01-11It's old, it's time for a new one.
This is the national standard: the height of the water seal is not less than 5CM (from the upper edge of the pipe mouth), the area is not less than 100*85CM, less than this is unqualified, mainly for odor insulation, in addition to convenient toilet cleaning and flushing. >>>More
This is a water seal, which stores a certain amount of water in the urinal and plays a deodorizing function of closing the upper and lower passages. AND THE DEPTH OF THE WATER SEAL OF THE TOILET CAN NOT BE LESS THAN 50MM
Because of the dampness and darkness.
Buy some of the class is to wash the toilet with the smell of the class is a thing, sleep every day to the edge of the drain and pour it in for a period of time to try. But be sure to keep it clean and keep the ground dry, these things are easy to live and multiply. Maggots, insects of the order Diptera Ringptido. >>>More
If you're a girl, it's inflammation, just take some three gold tablets.
All toilets must have water, or how to isolate the smell? It's just that the toilet is divided into siphon type and flush type (also called flush type) according to the flushing method.