-
Anonymous users2024-01-24How to deal with loose door handles in cars:
1. First open the front door, you will see a plastic cover on the side, open it to see that there is a screw inside, loosen it a few times (do not loosen it), you can pull out the lock cylinder from the outside, there is a pull wire buckled on the handle, adjust the tightness of the pull wire;
2. The screws of the rear door are blocked by sealing strips, which need to be opened by hand, and the treatment method is the same as that of the front door, but when installing, it is necessary to apply grease to the lock cylinder;
3. If it is a lock with induction, there is no way to deal with it, because it is easy to damage the line, and it is recommended to go to the repair shop to deal with it.
-
Anonymous users2024-01-23This is a bit of a hassle to deal with on your own, as the screws on the door handle are inside the door trim panels and need to be removed to tighten them. Many components are installed on the trim panels, such as glass lift switches, etc. Therefore, it is recommended to go to the repair shop and find a professional master to fasten.
I don't know what kind of car it is, you can change it or buy spray paint on Taobao and spray it yourself This is very simple, and it is too expensive to repair it at the maintenance point.
Hello! Replace the door handle, what kind of car you need to see This little thing is cheaper, I hope my answer can be helpful to you [If you have a question about the car, ask the car master. Professional technician in 4S shop, 10 minutes to solve. 】 >>>More
If the handle is loose with the panel, there are two screws on the panel of the handle on the inside (indoor) of the door, and after finding it, tighten it with a Phillips screwdriver. If the handle is loose or falls off, you need to remove the two screws of the panel and remove the handle, and see that a circlip on the handle is falling off or broken. Take a look at it yourself, if you can't handle it yourself, it is recommended that you find a local lock company to help you repair it.
Can't stuff It's not easy to stick [If you have a problem with the car, ask the car master. Professional technician in 4S shop, 10 minutes to solve. 】
Hello! In a situation like yours, it is usually caused by the connecting rod of the exterior handle and the door lock falling off. It is recommended that you go to the repair shop to disassemble the door trim and check and adjust the connecting rod. >>>More