What to pay attention to when installing a shower room

Modern life family house decoration, most people put their eyes on the shower room decoration, how to lay out the bathroom, what is the minimum size of the shower room, are one of the more concerned issues, even if the ruler is measured, the data is just data, can not intuitively reflect the actual size of your shower room can only rely on your imagination. Today, I will tell you about the specifications of the shower room.

Basic size vs. minimum size

1.Shower room width:

Basic size: 900mm*900mm Minimum size: 800mm*800mm

At the very least, it is necessary to ensure that the body can rotate freely during use and will not always hit the glass. Generally, 900mm*900mm is appropriate, if the family is fat, it can also be made into 1000mm*1000mm, or the bathroom space is limited, it can be made into 850mm*850mm, but it is best not to be less than 800mm*800mm.

2.Shower room height:

Usually the height of the ceiling is 2400mm, so the height of the shower room is mostly 1800mm 2000mm, which can also be adjusted according to the actual space situation of the family's height, and it is also necessary to pay attention to the position of the shower, which is too low and easy to splash outward, and too high to hinder the appearance and affect the air permeability.

3.Distance from heating equipment:

For the convenience of bathing in winter, we will install a heater or bath bomb in the bathroom, if it is a test and hanging equipment, it is best not to put it in the shower room or near the shower room glass to prevent moisture. If it is hung on the top, it depends on the size of the bathroom, the heating equipment in the small space is placed in the middle, not necessarily in the shower area, if the space is relatively large, it can be placed in the middle of the shower area, try not to face the shower, shower room glass, otherwise not only can not achieve a good heating effect, but also easy to cause product aging or self-explosion.

4.Distance from other fixtures:

The bathroom is often placed compactly, and there are often bathtubs, toilets, and bathroom cabinets next to the shower room, and a spacing of about 100mm should be left, otherwise it is easy to affect each other when it is easy to use, which increases the possibility of self-explosion.

The history of the shower room is much shorter than that of the bathtub, but the shower room is more convenient and more hygienic, so in the housing decoration fever, the shower room has become the choice of many citizens. According to the appearance, the shower room can be roughly divided into curved ruler type, diamond type, arc type, and the frame color is mostly bone and white, but also golden, sub-golden and bright silver, matte silver and other colors. The bottom of the shower room is mostly installed with ceramic or acrylic shower trays, and the frame is generally sprayed with plastic film on the surface of aluminum alloy profiles, and the screen plate material is PS offset or tempered glass.

When purchasing a shower room, pay attention to: the shape of the shower room should be suitable for the structure of the bathroom, the color should be matched with the purchased sanitary ware, and at the same time pay attention to whether the frame is strong and stable, whether the surface of the profile is smooth and clean, no wrinkles, shelling, screen board materials such as PS glue board, the outer surface is required to be smooth, no spots and color difference, the thickness is about 4mm, good straightness, high strength. The shower room with tempered glass screen plate requires high strength, good transparency, and small geometric size error.

The assembly of the shower room should be carried out strictly according to the assembly process, the appearance of the assembled shower room is required to be clean and bright, the stall door and the sliding door of the shower room are parallel, perpendicular, and symmetrical to each other, and the opening and closing of the two moving doors are convenient and smooth, and the closure is seamless, and the water is not permeable. Silicone sealing should be applied between the shower room and the shower tray to prevent water seepage. Specifically, you can go to the TOGO forum to learn about it, the explanation is very detailed, illustrated and illustrated, there are questions you mentioned, and the answers are quite valuable for reference, you can learn from it, there is too much content, so you can't stick it up***

Check out the essence post of the tide house, and I will already give you the answer. --

Shower room installation process: Install the bottom basin of the shower note, the first thing is to put the bottom.

The parts of the basin are combined to determine the levelness of the basin to ensure that there is no water accumulation in the basin, and the pipe should be expanded and contracted with the distance, and then the bottom of the basin is firmly connected with the floor drain. After installation, a water test is required to ensure that the water is unimpeded. Positioning, punching:

Use a pencil and a level to determine the drilling position of the aluminum against the wall, and use a percussion drill to punch the hole. Install aluminum. Fixed glass.

Install pipe jacking: find the corresponding position above the fixed glass and drill holes, install (straight and beveled) fixing seats and connect the pipe jacking. It is fixed to the top of the glass with a bent sleeve. Install the shelf.

Install the movable door: Install the hardware of the movable door and install the hinge at the reserved hole of the fixed door. After installation, adjust the position of the shaft core of the lotus leaf until the door feels the best. Do a good job of waterproofing. Debugging is over!

Shower room water retaining strip construction method: when paving floor tiles, leave a groove, cement mortar has been paved, put in the marble water retaining strip. Use bricks to create the shape of a retaining strip and lay tiles or marble slabs.

First consider the size, faucet, sprinkler, shower, circuit, telephone line and other reservations, to do water and electricity when the shower room is set, you need to carefully ask the manufacturer before installation precautions. The water retaining strip can be buried before laying tiles, so that the water will not seep out after a long time, but the disadvantage is that it is difficult to repair and replace. You can also not bury it in it, seal it with glue, and keep it out of water, but after a long time, it will not be sealed after aging, and it will seep water.

The installation environment, the size of the space, the brightness of the light, and the placement of sanitary appliances are all factors that affect the installation of the shower room.

What to pay attention to in the design of the shower room.