-
Anonymous users2024-01-24The wall near the bathroom is damaged after being wet, and it is recommended to remove the cement from the damaged place when repairing, and then use cement to level and decorate with real stone paint.
First of all, even if the wall is damaged, it will be damp again, the room is not a restaurant, it is impossible to paste tiles on the wall, and the base is moisture-proof with cement, and then, design the color of the wall of the house, find a construction master who will do real stone paint, and decorate the wall with real stone paint, which not only increases the aesthetic sense of art taste, but also protects the wall from moisture.
-
Anonymous users2024-01-23Shovel off the damaged depowdering place and its surroundings to the cement and sand wall, dry and brush the waterproof glue, dry thoroughly and then paint the plaster.
-
Anonymous users2024-01-22Installation of the whole bathroom, chassis stainless steel integral prefabrication, double-layer guarantee, wall cruise ship with plates, no peculiar smell. There is no need to worry about leakage.
-
Anonymous users2024-01-21**As far as I know, it's pretty good, I used to have water seepage in the bathroom, caused by water seepage next door, and now it won't be. It is formed by penetrating into the substrate and reacting to form a waterproof layer.
-
Anonymous users2024-01-20If the wall is damp, it is normal for the local climate to be humid or the back of the damp wall is damp, and the wall is damp due to water seepage from the back.
1. Thoroughly clean the peeled and damp wall with a shovel.
2. Continue to remove the floating ash on the wall to prevent the floating ash from affecting the bonding strength.
3. Evenly brush the separator with a brush and apply it 2-3 times, with an interval of about 3 hours between each time.
4. After the isolator is dried, the putty can be scraped in batches, and the batch scraping time is not less than 24 hours each time.
Please click to enter a description of the image.
5. After the putty is dried, carefully polish it with No. 180 sandpaper.
6. Clean the surface dust and paint latex paint 2-3 times, with an interval of about 6 hours between each time.
Kitchen smoke duct, one section per layer, should be concealed before plastering, and should be replaced if it is damaged, which is the right way.
The damage is not very large, and it can be covered by: 1. If the location of the floor is damaged, it can be covered with some ornaments or furniture. 2. If you are a perfectionist, then consider changing a floor tile.
1. On the one hand, it is to do exterior wall waterproofing, and in addition, you can use a household dehumidifier at home, which can solve your problems by treating both the symptoms and the root causes.
This is because of the thermal expansion and contraction of the cement, so it has to be removed and re-pasted.
You can use the wall anti-mildew products on the market, such as Aihaoer's wall anti-mildew agent, and add some anti-mildew agent when the latex paint paints the wall can play a complete anti-mildew effect for 8-10 years.