The bathroom floor tiles are basically about a millimeter of joints, and water can seep down from th

This one hasn't been used. When choosing a sewing agent, you don't necessarily choose an expensive one, but you can't choose too cheap, after all, you get what you pay for. A good sewing agent can bring you wealth, how to choose a sewing agent, mainly depends on the following points:

1. The hardness reaches the hardness of the tile, so as to ensure the service life.

2. The toughness is slightly smaller than the toughness of the tile, so as to conform to the expansion joint of the tile and prevent the brick joint from being separated from the tile.

3. High strength and high flatness, so as to ensure that after the beautiful seam, the brick joint is flush with the brick surface, and there will be no concave and dirty after the beautiful seam.

4. Colorless and odorless, can be constructed by bare hands, green and environmentally friendly.

5. The material density is large, so as to ensure that it is delicate and flawless, and there can be no pimples in the situation is a high-standard sewing material.

6. The color is bright and delicate, the color should be symmetrical and diverse, and the high-standard sewing materials should have 100% color matching.

7. High bonding strength, so as to protect the tile from hollowing and loosening.

8. The coverage of the sewing agent, the stronger the coverage, the better the covering of the base stains of the sewing agent, which is both beautiful and healthy.

Summary. If you feel that it is difficult to penetrate the gap of 1mm, you can choose an epoxy color sand with simple construction, which is the same as scraping putty powder. Mix the colored sand evenly, scrape it into the gap with a scraper, no matter how deep and wide the gap is, the excess colored sand will overflow the gap after it is full, and it can be scraped off with a scraper and can be reused.

The construction of epoxy colored sand is not too skillful, and it is easy to fill the gaps, and the owners in need can choose this beautiful sewing product.

The bathroom floor tiles are basically about one millimeter of joints, and water can seep down from the tile joints.

If the gap is less than 1mm, it is still not recommended to do beautiful sewing. Because tiles need space for thermal expansion and contraction when they are in use, gaps below 1mm can only ensure the normal use of tiles. If the hall is added to the beauty sewing agent, the space may be insufficient, which will lead to the arching of the first lead hidden tile, and the gap is too small, and the beauty is difficult to enter.

If the gap is only 1mm, the owner can choose to open the seam and clean the inside of the seam, especially on both sides of the gap. In the case of not destroying the glaze of the tile, the professional cleaning of the seam can clean the gap very clean, so that the gap looks much wider than the previous one.

If you feel that it is difficult to penetrate the gap of 1mm, you can choose an epoxy color sand with simple construction, which is the same as scraping putty powder. The color sand mixture is evenly mixed, scraped into the gap with a scraper, no matter how deep and wide the gap is, the excess color sand will overflow the gap after it is full, and it can be scraped with a scraper to make the stool clear. The construction of epoxy colored sand is not too skillful, and it is easy to fill the gaps, and the owners in need can choose this beautiful sewing product.