-
Anonymous users2024-01-24The faucet of the house is unified.
When you buy it, take the old one.
Ask the merchant directly, how to install, wrap more raw tape, plumbing and other materials to buy pure copper with better texture, some buried in the wall, don't be cheap.
-
Anonymous users2024-01-23The style and size of the faucet are not consistent, but the wire mouth of the screw is the same, and generally the new faucet can be installed.
You should be using a quick-open flushometer, and if you have been using it for a long time, it will not be expensive to simply replace it with a new one. If you want to repair it yourself, you can go to the plumbing equipment store to buy a quick-open valve core, remove the handle decorative cover, remove the screws, you can take off the handle, and then remove the quick-opening valve core and replace it with a new one, and reinstall it back!
There is a kind of mixer with a drain switch, and a rod is strung through a small hole to connect the drain switch. If you don't have a drain switch, the small hole won't be of much use.
This is more difficult to take (it is best to find professional maintenance), do it yourself to use 250 movable wrenches, hydraulic pliers, 8-10 small opening wrenches, 8 sets of copper or pliers. First, use a wrench to remove the hose connected to the angle valve. Follow the water inlet hose to check the fixtures of this faucet and basin, if it is a large plastic screw or copper hexagonal screw mother can be removed with hydraulic pliers, if it is a small screw with iron plates, with 8 sets of copper or tongs can be removed!
This is more difficult to take (it is best to find professional maintenance), do it yourself to use 250 movable wrenches, hydraulic pliers, 8-10 small opening wrenches, 8 sets of copper or pliers. First, use a wrench to remove the hose connected to the angle valve. Follow the water inlet hose to check the fixtures of this faucet and basin, if it is a large plastic screw or copper hexagonal screw mother can be removed with hydraulic pliers, if it is a small screw with iron plates, with 8 sets of copper or tongs can be removed!
The first step is to unscrew it down.
Then wrap the raw material tape and wrap a little more. >>>More