-
Anonymous users2024-01-24You're talking about wax wood staining.
Lacquer The scientific name of wax wood dyeing, also known as wood wax oil, is a kind of primitive solid wood dyeing.
After rubbing, the wood has a clear natural wood grain, especially high-grade wood, the appearance is more realistic, the three-dimensional sense is strong, and the visual impact is very strong. It also protects your wood. Non-toxic and tasteless, very environmentally friendly, with a wide variety of colors and patterns, classical and solemn.
It can also be waterproof, sunscreen, stain-resistant, scrub-resistant, and the construction is simple and easy to learn.
Adhesion When it comes to the construction of wood wax oil (wood wax oil), we must first understand the principle of wood wax oil adhesion to wood, and the finish after grinding and polishing looks smooth and flat, and when viewed under the microscope, it is evenly covered with honeycomb-like pores. The ingredients of Longtu water-based environmentally friendly wood wax oil are natural colored minerals and palm oil and other formulas, which are mixed with water and have strong permeability, which acts on the interior of the wood in the process of rubbing, so that it can complete the dyeing at the same time, and also greatly extend the service life of the wood.
The ambient temperature of the construction should be between 10 and 28; Fill the pores with wood filler of similar color to wood, and gently smooth it with sandpaper after drying to ensure that the finish is free of dust; Add 20%-50% purified water to dilute Longtu environmentally friendly wood wax oil (twice the coating rate of other domestic brands); Use a slightly damp sponge or non-flannel cloth to apply wood wax oil in a circular manner, evenly fill the holes of the wood, and quickly rub along the wood grain; Remove the excess paint with a dry cloth in time, and use a dry cloth to test the wood grain from one end to the other to achieve a smooth and uniform finishing effect; After half an hour of drying, apply a layer of water-based sealing primer, and gently polish it with fine sandpaper after drying; Finally, apply a layer of water-based topcoat with a brush (fine bristle brush) or spray application. After drying, lightly polish with fine sandpaper and apply the topcoat again. The topcoat can be applied in 2-3 coats.
The above is my practice process, and the entire process of wiping paint will be different due to the different processes of various brands of wood wax oil.
If the topcoat is enough, you can use the Rongpeng 901 to spray the furniture spray gun. Some.
Bright's brand building continues to sublimate and win wide respect from all walks of life, especially in recent years, it has won more than 20 authoritative honors such as "China's Top 100 Enterprises in Light Industry", "Outstanding Enterprise in China's Furniture Industry", "The Most Influential Brand in China's Furniture Industry", "China's Top Ten Solid Wood Furniture Brands", etc., and the "Guangming" trademark has been identified as "China's well-known trademark", and Guangming Group is entering thousands of households with a new attitude.
It is best to use wood gum powder, because the wood gum powder solidifies into a yellow color. It is very similar to the color of most mahogany. After the gum powder has dried, it is very hard and is very temperamental to mahogany. >>>More
Tinting ointment??? It should be someone's patented product, since it is expensive, it should be worth the money, otherwise how to sell it!! If you know how to be a manufacturer, you don't need to produce!!
Shovel off the paint where you cracked, and then go buy putty, the good putty quality of the brothers is very good, more than 30 yuan a bucket, use putty to smooth the cracks of your furniture, and then polish it smooth with sandpaper, and then paint it with the same paint, it's OK, this is oil-mixed furniture. If the clear oil furniture is troublesome, also use putty to do the same color of paint plug flat, polishing, and then use the same color paint thin brush a little, after polishing, and then brush a side of varnish, you had better ask a professional oiler to repair, it is easy to say, but the operation is still quite troublesome. This kind of problem is very complete on the forum of the Aiju network, and it is recommended to take a look.