-
Anonymous users2024-01-24Mix alkali with water (80 degrees), ratio: 1 to 20, the container is best used for corrosion-resistant. Pay attention to safety, don't get it on your body, and wear leather gloves and other protection.
-
Anonymous users2024-01-23Uh-huh,The 1st floor is the right solution.。。 Use flake soda (caustic soda), but be careful when using it.
-
Anonymous users2024-01-22Wet the plastic wrap with water poured with dish soap first, then spread the plastic wrap flat to cover the oily area, and it is easy to remove the plastic wrap after ten minutes and wash it.
-
Anonymous users2024-01-21I put the detergent on the wire ball and rubbed it with water.
The methods are:
1. Baking soda. >>>More
Flush toilet dirt removal method:
1.If the dirt is not heavy, it can be cleaned with a toilet cleaner. >>>More
1. Clean all with cleaning products at home, such as laundry detergent, dish soap, etc., wipe it with water several times after washing, and then take care of some expired skin care products. >>>More
It can be cleaned with a Blue Moon or Mr. Mighty Moon.
1. Alcohol wiping method.
The alcohol wiping method is to use the cleaning characteristics of alcohol to clean the wall, first prepare alcohol and a rag, and then apply alcohol to the rag, and wipe the wall with a rag to remove the oil. Choosing alcohol to clean the wall can not only remove the oil on the wall, but also achieve the effect of disinfection and sterilization. If you encounter a more tenacious stain, you can spray alcohol directly on the stain, and after soaking for a while, you can directly use a rag to clean it off. >>>More