-
The pressure lever inside is stuck and can't bounce back, and the big and small buttons will have this problem, and the small ones are easy to happen frequently. Open the button cover, flick it with your hand, and it will pop back. Cover it back again, and everything will be restored.
If you do this more often in the future, you should change the flush valve.
-
Hello, there are three scenarios:
1. The water level of the water tank is high enough, the flushing is poor, and the air pressure is caused. Check that the bottom of the threaded hole on the 2 sides of the toilet is sealed. You have to leave the seams.
2. The water level of the water tank is not high enough, adjust the water accessories, the water level rises, and a siphon and enough water are formed.
3. The water in the tank passes through the toilet seat with insufficient water, and there may be interruptions between the pipes.
-
Excuse me, how did you solve your problem?
-
It may be that the drain pipe is blocked.
-
Hello, I have seen your question and am sorting out the answer, please wait a while
Hello, there are three situations: 1. The water level of the water tank is high enough, the flushing is poor, and the air pressure is caused. Check that the bottom of the threaded hole on the 2 sides of the toilet is sealed.
You have to leave the seams. 2. The water level of the water tank is not high enough, adjust the water accessories, the water level rises, and a siphon and enough water are formed. 3. The water in the tank passes through the toilet seat with insufficient water, and there may be interruptions between the pipes.
There are two situations for this phenomenon: one is improper installation; One is the problem of accessories. Improper installation may be due to the fact that the button lever does not match the drain valve, if the toilet has not been touched. >>>More
What type of toilet installation is basically the same is that the flushing method is different, the siphon type has an automatic flushing function, the water level reaches a height and is automatically flushed, and the water level can be adjusted.
The porous water is the old style, and now the new siphon toilet has two flush holes, one left and one right, and the flush will form a whirlpool, which is cleaner than the porous flush.
Check that the tank is clean – who comes from the tank, there can be no reflux!
This is a problem with the quality of the siphon inside the toilet, which has nothing to do with the water pipe of the water tank.