How should office furniture be protected from insects?

Clause.

1. Select wood that has been dried to a qualified moisture content. When buying wood for furniture, it is necessary to choose wood that has been dried, has low moisture content and is of good quality. If the moisture content of the wood bought back is high, it should be sawn into planks or small square materials immediately according to the specifications of the furniture, stacked in a ventilated and dry place to dry, do not expose to the sun, in order to prevent bursting and deformation, the dried wood is not easy to be parasitic and multiplicated by moths, and the furniture made will not be moth-eaten.

Clause. Second, the use of pharmaceutical prevention and control methods. Before making wood into office furniture, if insects occur, you can use 1 part of boric acid and borax, add 30 parts of water, fully dissolve and paint dry wood. Brush several times to allow the liquid to seep in.

After drying, you can make office furniture, and when the furniture is finished, you will paint it again, and there will be no insect moth. If the finished furniture is still moth-eaten, you can use kerosene to mix 2% 5% dichlorvos solution and paint it 3 or 4 times. The nymph eye is larger, and it can be plugged with absorbent cotton dipped in the solution, and the deeper and tighter the plug, the better.

Repeated application of the liquid medicine several times can completely kill the moth.

Clause. 3. Take out the items in the office furniture of the long insect first, and put it in the sun to dry if it can't be cleaned; Office furniture should be wiped several times with disinfectant, and thoroughly ventilated and dried after wiping; For wood office furniture that has been damaged by moths or termites, a small amount of insecticide solution (dichlorvos) can be dropped into the moth-eaten holes, or it can be mashed with sharp peppers or peppercorns and stuffed into the moth-eaten holes.