-
Anonymous users2024-01-24It should be a glass fiber mesh or some waterproof membrane, there are many places to consider for bathroom waterproofing, waterproof, moisture-proof, seepage-proof, mildew-proof, easy to clean, etc., generally speaking, you need to do a 2-layer waterproof system to use longer, and the waterproof effect will be better. Generally speaking, the use of 911 or 811 waterproof coating will use glass fiber mesh, while some good quality and good performance waterproof coatings are not used, such as Repham intelligent waterproof coating.
How do you make a bathroom waterproof? Let's find out.
Bathroom waterproofing needs to be painted with waterproof paint twice, the first waterproof coating needs to ensure that it is firmly combined with the base layer, and then brush the second time after the first paint is dry, and then carry out a closed water experiment after completing the brushing, and observe that there is no leakage before it is completed. >>>More
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More
To do a good job of ground waterproofing: before laying floor tiles, we must do a good job of waterproofing engineering; After the tile is laid, it is necessary to ensure that the brick surface has a drainage slope (generally about 1% is appropriate), and the slope is towards the floor drain, which is conducive to wastewater discharge. >>>More
1.The waterproof layer of the kitchen, the ground is all waterproof, the wall is 30 cm high, and the waterproof of the water, such as the dishwasher, shall not be lower than the water range. >>>More
1. Bathroom waterproof construction steps.
Step 1: You can use a slightly coarser cement to base the foundation first, and then brush the waterproof paint after the cement is dry. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More