How to repair the solid wood bed head if the paint is off

There are two situations in which solid wood furniture peels off paint:

First, hard bumps, this is easier to repair, local grinding and cleaning, re-scraping putty, and then polishing, and the color is as close as possible to the paint brush of the primary color card.

Second, the factory process is unqualified, the moisture content of the wood exceeds the standard shrinkage, etc., falling off and cracking, which is mostly caused by the manufacturer cutting corners, it is best to wait a little longer, so that the problem places are exposed, and the cracks, shelling, peeling knock off, and then according to the first repair method can be treated, but the cost may be much higher.

Of course, the above is just ordinary paint, if the piano paint, baking paint, the general manual is not able to repair, it is recommended that you send it to the manufacturer for maintenance.

You don't have to repaint, just use putty to make up the place where the paint has fallen off, adjust the color with paint, and point it with a brush. It is best to go to the decoration place to find some polyester varnish and add the color essence of the desired color to solve the problem.

1. If there are cracks in solid wood furniture, you can use white glue and sawdust to stir evenly, put them in the gaps, and polish them with sandpaper after a day and a night.

If the cracks are more serious, you can choose a catalog the size of chopsticks, sharpen the tip and coat it with white glue and plug it into the hole of the wooden screw, break the wooden strip after hammering in, and then screw the wooden screw back in to tighten it.

2. There are cracks in solid wood furniture, and there is a simple way to deal with it, add an appropriate amount of alum, boil the water, embed it in the seal, and it is relatively firm after drying.

3. There are furniture care essential oils in general supermarkets, and the essential oils are applied to the surface of solid wood furniture, which can lock the moisture of the wood to a certain extent and prevent cracks and deformation of the furniture. At the same time, it has a certain moisturizing effect.

4. In addition, the wooden furniture may appear astringent in the drawer after a long time, in this case, the drawer can be pulled out and turned over, and the candle oil can be scalded on the drawer with an electric soldering iron to make the oil seep into the wood. Use the same method to iron candle oil on the corresponding channel of the table and cabinet, which can reduce the wear and tear of the drawer.

Clean the furniture regularly, do not clean it directly with water, and regularly apply a layer of wax to the furniture, which can not only increase the brightness and beauty of the furniture, but also have a protective effect on the furniture