In CAD drawings, why is the elevation of the kitchen floor always written 0 02, is the kitchen floor

Updated on Kitchen 2024-08-29
3 answers
  1. Anonymous users2024-01-24

    The kitchen is the same as the bathroom, because there is water in these two rooms, it is necessary to reduce its elevation, about 30cm lower than the standard floor slab, to prevent water from flowing out, and at the same time, these two rooms have about three thousandths of a slope to the drainage pipe when laying floor tiles, which is common sense in architecture, I hope to help you

  2. Anonymous users2024-01-23

    That's a low grade of 2 centimeters left for you. Avoid water from the kitchen running into your other rooms. Or the living room. It's the same with the bathroom.

  3. Anonymous users2024-01-22

    Because the kitchen is prone to stagnant water, the kitchen floor is often lowered relative to the rest of the room in order to prevent it from flowing into the room.

Related questions
2 answers2024-08-29

6 pin holes with a diameter of 10mm and a depth of 12mm

1 answers2024-08-29

It can be represented by a thick solid line.

Computer Aided Design (CAD) refers to the use of computers and their graphics equipment to help designers carry out design work. In the design, it is usually necessary to use computers to calculate, analyze and compare different schemes to determine the optimal scheme; All kinds of design information, whether digital, textual or graphic, can be stored in the computer's memory or external memory, and can be retrieved quickly; Designers usually start with sketches, and the heavy work of turning sketches into working drawings can be handed over to the computer; The design results automatically generated by the computer can quickly make graphics, so that the designer can make judgments and modifications to the design in time; The computer can be used to process the graphics data related to the graphics, zooming in, zooming out, translation, copying and rotating. >>>More

1 answers2024-08-29

I am in the road and bridge industry, and I am not very familiar with decoration, but I think that in addition to industry habits and experience, the operation of CAD is the same. I think it's important to use a lot of blocks, insert blocks, and modify the proportions of blocks. It is also necessary to use a lot of parametric drawing, for example, if the sample is consistent only for size changes, it is suitable for parametric drawing, and parametric drawing can also write formulas (but it cannot be judged by the if function). >>>More

1 answers2024-08-29

First, what is the color of the kitchen floor.

62616964757a686964616fe59b9ee7ad9431333363393732 color good. >>>More

1 answers2024-08-29

The kitchen floor should not be made of porcelain tiles that are too white, which is not resistant to dirt. It depends on what color you use for the ceiling, and the general ground color is a little darker than the top color. Otherwise, it is easy for the younger generations in the family not to listen to the elders. The order is reversed.