-
Anonymous users2024-01-24First of all, the dry and wet partition of the bathroom needs to be very clear, and the waterproofness must be taken into account when decorating. We all know that it is easy to have water on the wall of the bathroom, and then it will flow down the wall, if your home is a wall tile pressing the floor tile, the water will naturally flow to the floor tile, and then drain into the floor drain through the slope of the ground. However, if the floor tiles press against the wall tiles, water will seep into the gaps in the edges of the tiles in the corners.
-
Anonymous users2024-01-23To be specific, if you talk about the bathroom alone, the general home decoration can use aluminum gusset ceiling, and sanitary ware can also be installed.
Block with floor tiles, glue the drain and seal it to death, and then lay floor tiles on it to make marks to prevent future toilet pressing.
If the sewer trap is not set up, or the main drainage riser is not wrapped, you can go to Taobao to find the additional anti-air return valve.
1. Knock off the paved bathroom floor tiles, choose your favorite color and pattern and re-pavement. >>>More
The bathroom has a water space, and the entire ground should be fully waterproofed, and the walls on all four sides should also be waterproofed no less than meters. The waterproofing of the floor of the bathroom is done after the floor is leveled before the floor tiles are laid. I don't know what you mean by waterproof strips. >>>More
Bricks, too troublesome and unstable, with glass partitions, the process is simple and easy to operate, and the glass can be used to make the kind of blurry glass that cannot be seen clearly.