-
Anonymous users2024-01-24The overall is calculated according to the square, if only the side is calculated according to the linear meter Take the width of 600mm as an example, the width greater than 600 may be calculated according to the area, that is, every very section must be calculated. Less than or equal to 600.
Taking a width of 600mm as an example, a width greater than 600 may be calculated according to the area, that is, every very section must be counted. If it is less than or equal to 600, it shall be calculated according to the extension meter.
Calculation method: (length + width) 2 room height = wall area. >>>More
It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
The labor cost is calculated according to the actual area of the bathroom (square meters), and the material cost needs to add a little loss, and the number of losses is more or less, which is related to the size of the bathroom and the specifications of the gusset, which can be determined by "actual settlement".