How to measure the distance between the toilet pit and the toilet pit accurately

The distance between the center of the toilet drain pipe and the wall is the toilet pit distance. Generally, there are 300 mm, 350 mm, 400 mm, etc. Only by choosing the right pit spacing can you choose the right toilet.

When choosing a toilet, if you are going to paste tiles when decorating, you need to measure the pit distance after the tiles are pasted, otherwise it will be troublesome if the toilet is bought and cannot be installed. So how to measure the distance of the toilet pit? The method of measuring the pit distance is actually to measure the length from the middle of the drainage pipe to the wall, and the measurement method of horizontal and vertical rows is the same.

How to measure the distance of the toilet pit, first of all, the toilet is divided into two water outlets: ground row and horizontal row, the horizontal row can only be installed with a straight flush toilet, and the ground row can choose to install a flush toilet according to the pipe structure, and you can also choose to install a siphon toilet.

How to measure the toilet pit distance, pay attention here, because the tile has a thickness, so it will affect the length of the pit spacing, if the manufacturer's toilet is marked as 400 mm pit spacing, basically around 380 mm, the manufacturer generally takes 20 mm as the reserved thickness of the tiles.

1. How to measure the distance of the toilet pit, first of all, do a pre-measurement when there is no tile, and measure the approximate size. Then memorize this size and go to the market to see the toilet.

2. Paste tiles in the bathroom, and finish all the wall tiles and floor tiles. Plug the sewer opening. At this point, you can measure the exact toilet pit distance.

3. How to measure the distance of the toilet pit, expose all the blocked sewer outlets, and measure the distance from the tile wall to the middle of the sewer with a tape measure.

4. If you are afraid that the measurement will not be accurate, first use a tape measure to measure the distance from a wall to the edge of the sewer, and then measure the diameter of the sewer. The previous number plus the sewer radius is the exact pit spacing.

5. Generally, the distance between the toilet pit of the general brand is 30 cm or 40 cm. There are also a few toilet brands with 35 cm pit spacing toilets.

6. By selecting the toilet brand in advance, when it is time to buy, inform the merchant of the specific measurement data and you will buy the toilet with the correct pit distance. If the rules are just right, then choose the same toilet, and the toilet will be close to the wall. If the actual rule is between two toilet specifications, you should choose the one with a small size, and the large size will not fit.

How to measure the distance of the toilet pit, you can measure the distance from the center of the toilet sewer pipe to the wall according to different drainage methods when measuring.

The pit spacing of the drainage method refers to the distance between the center point of the ground sewer hole and the undecorated wall. After the drainage method, it is necessary to measure the distance between the center point of the drainage hole and the ground. We must strive to be accurate when measuring, and the escort network reminds that the general installation of the toilet is carried out after the completion of the construction of the wall and ground, and the measurement error cannot exceed 1 cm, otherwise it cannot be installed normally.