Haier aluminum gusset ceiling lampshade can be taken off

It's generally the kind of material that you can take out by pressing it inside My house and the previous ones are all installed by me The installation is also pressed inside Generally, a lampshade has six small cards You need to press the edge.

The answer is that if it is a square aluminum gusset, it is very simple, use a chuāi zi (chuāi zi) that leads to the sewer to suck the center of the gusset near the ceiling lamp, and drag it down to remove the gusset, if there is still one side of the board stuck in the crack of the keel, reach in and press it down there, in short, to remove the adjacent gusset. Next, reach in, press down the two sides of the ceiling lamp gusset that are clamped by the keel, and you can remove the gusset of the ceiling lamp, and then buckle it up as it is after changing the lamp. >>>More

You first use the suction cup used to hang small things to suck on the corner of the gusset next to the lamp, and gently pull it down to come out·· If you don't have a suction cup, use a utility knife (or something like that if you don't have a utility knife) and insert it into the middle of the two gussets, but be sure to insert it in the corner of the gusset! You can get out even if you push it down...

First of all, remove a piece of the gusset next to the lamp (with a suction cup or a sticky hook), then remove the lampshade, and then press the tube of the same model. Finally, press the lampshade and the removed gusset. >>>More

Measure the size of the opening of the lamp, and then insert the gusset plate after the opening on it. If the lamp is more important, add stiffeners when the ceiling is suspended.