-
Anonymous users2024-01-24Add an extra live or ground wire. 3 wires to connect the light and fan. Then the switch can be connected separately.
-
Anonymous users2024-01-23Use an electric pen to find a live wire, press the live wire at the L1 hole, and then use a small wire to connect to another L1, and the remaining 2 and the zero wire enter L2 respectively, which cannot be connected in series.
If it is confirmed that the power supply line of the exhaust fan has been disconnected, the rotation of the exhaust fan is a natural rotation, that is, the rotation caused by airflow.
Probably not, the heating exhaust fan in the bathroom is on the bath bomb, and the ventilation exhaust fan should be installed on the wall to pump the air out of the bathroom.
It's no problem to connect together, and each has a switch that can work separately. >>>More
The safety of the toilet should be installed at the entrance and the lighting should be installed in a row, including bath bombs and other ......
Install a bathroom exhaust fan, go to the hardware store and ask them will give it to you, the bath bomb can be installed in the back, and the power cord can be reserved in the ceiling, and then consider increasing it if you feel that it is not warm enough in winter.