-
Anonymous users2024-01-24The kit for the outlet of the toilet tank, you can replace it, it is the white one all (the blue one with the float in the water does not need to be replaced).
-
Anonymous users2024-01-23Fill it with water, lift the float, there is air.
Open the lid of the water tank to see if the float of the water supply valve is stuck or the plug is stuck, the water level is too high and exceeds the position of the float, that is, the sealing ring inside the water supply valve is broken, and it is recommended to replace it with a new one.
The flush toilet has a certain amount of water storage, and when it is used up, it runs out of water.
If it's water in your own toilet tank, it's because the fittings in your tank are broken.
1。Put a few pieces of paper in the toilet bowl before you start Remember to be sure to lay it down so that when the poop falls down, it will be held by the paper first There is a good cushioning force The splash will not splash on the fart This is the easiest and most effective way The only drawback is the lack of environmental protection spirit It is a waste of paper resources. . . >>>More
When the water temperature exceeds 45 degrees, the power supply will be automatically extinguished, and the water tank will stop heating to avoid scalding. Moreover, the flush temperature of Taka can be set, and after setting, the water temperature is constant no matter when it is used.