Which brand of pure solid wood flooring is good, how to choose pure solid wood flooring

Updated on Solid wood 2024-07-11
2 answers
  1. Anonymous users2024-01-24

    1. Floor specifications.

    In terms of the stability of the plank, the smaller the size of the floor, the better the resistance to deformation, so it is necessary to choose a shorter, narrower solid wood floor, and minimize the bending, twisting, scooping, shrinking, arching and other phenomena of the solid wood floor. Flooring experts believe that the short one is better than the long one; The narrow one is better than the wide, and it is cheap. But now the market is popular wide plate, the wide plate is more beautiful than the narrow plate, generous, the texture is relaxed, the pattern is complete, but the qualified wide plate must go through strict material selection and quality acceptance.

    In general, wide floors should have deformation-resistant grooves on the back, and the grooves should be up to one-third of the thickness of the floor. If it is used for floor heating, it should be thin but not thick, generally 8-12mm thick.

    2. Floor moisture content.

    The moisture content of wooden floors is crucial. The moisture content of the purchased flooring must be equal to the local equilibrium moisture content. When buying a floor, be sure to measure the moisture content, if you don't have a moisture content tester, don't buy its board.

    The method of balancing the moisture content determination is very simple, first determine the moisture content of the purchased varieties in the exhibition hall, and then open the box to test the moisture content of the purchased varieties of wood flooring, if the moisture content of the two is only +1%--2%, it is a qualified product.

    3. Floor material.

    Observe with your eyes whether the floor is of the same material, and whether the board surface has material defects such as cracking, decay, peeling, dead joints, insect eyes, and blue staining. Usually there is no need to be too strict about color differences, joints, textures, etc., which are the natural properties of wood. It is the color difference and the natural texture that changes that show the natural color of the solid wood floor, which is the fashion pursued by the current international home decoration.

    4. Machining accuracy.

    Generally, after unpacking the wooden floor, you can take out about 10 pieces of freehand assembly, touch it by hand, see whether its processing quality accuracy, finish, whether it is smooth and smooth, and whether the tenon and groove fit, installation gap, denaturation resistance groove and other assemblies are tightly fitted. Observe the tongue and groove occlusion, assembly gap, and height difference between adjacent plates.

    5. Floor after-sales.

    There are many wood flooring manufacturers on the market, the quality is uneven, it is recommended to choose a good brand of wood flooring, these brand manufacturers will provide perfect after-sales service, and there is a certain warranty period. It can save a lot of worry.

  2. Anonymous users2024-01-23

    1. To choose a cost-effective floor, first understand the type of floor.

    At present, there are four types of flooring commonly used in the market: solid wood flooring, solid wood flooring, laminate flooring and cork flooring. Solid wood flooring, the flooring material formed by drying and processing wood; Parquet, solid wood sawn blisters cut into surface plates, core boards and base plates; Laminate flooring, composed of wear-resistant layer, decorative layer, base layer and balance layer; Cork flooring, made from the bark of oak trees.

    2. Inspection of floor quality.

    Take a look at the appearance to see if there are insect moths, color cracks, etc.;

    Second, look at the waterproofness, and see if the surface drips water to see if it is easy to penetrate into the floor;

    Third, look at the stain resistance, write on the surface of the floor with an oil-based pen, and then wipe it off with a damp cloth to see if there is any handwriting;

    Fourth, look at the wear resistance, scratch the surface of the floor with hard objects such as keys, and see that it leaves obvious traces;

    Fifth, look at the splicing, the seams of the good floor are neat, and they are embedded in each other after splicing, and the gaps are small.

Related questions
How to choose a solid wood floor
1 answers2024-07-11

First, look at the hardness.

The hardness of the floor is determined by its specific gravity. The harder it is, of course, the more wear-resistant. In general, the darker the color, the higher its hardness. >>>More

Which brand is better to buy Pan longan pure solid wood flooring
1 answers2024-07-11

Home decoration is good, but there will also be a certain amount of air quality pollution, building materials stipulated in the solid pollution, "Civil Building Indoor Environmental Pollution Control Code" pollutant name, Class I construction engineering, Class II construction engineering, formaldehyde, benzene, ammonia, radon, 200Bq m3, 400Bq m3, air free quality standards are formaldehyde, benzene, ammonia

How to sell pure solid wood flooring?
3 answers2024-07-11

Nowadays, it seems that few people use pure solid wood flooring, and it is not environmentally friendly to paint the floor.

How to maintain solid wood flooring?
3 answers2024-07-11

Do not rinse with water during use, avoid long-term sun exposure, continuous direct blowing of the air conditioner, prevent rainforest at the window, and avoid hard objects hitting and rubbing. To protect the floor, waxing can be done on the lacquered surface (waxing is better than painting from the point of view of protecting the floor). >>>More

How to choose a solid wood floor?
3 answers2024-07-11

1. Texture: It is the standard for judging the quality of the floor, and the regular texture is beautiful and generous, and do not choose those floors with disorderly textures. 2. Color: >>>More