There was a hole in the bathroom drain pipe, how to remedy it, the tiles were broken

Updated on Bathroom 2024-07-04
3 answers
  1. Anonymous users2024-01-24

    Find a small piece of the same UPVC pipe, cut it, use UPVC special glue, connect it together, and re-pour concrete on it.

  2. Anonymous users2024-01-23

    Glue the hole and then mix it with dry cement and sand to fill it.

  3. Anonymous users2024-01-22

    Hello, have you got this done?

Related questions
A hole was drilled in the water pipe in the bathroom wall, how to repair it?
8 answers2024-07-04

Close the water valve immediately.

Completely remove the damaged water pipe on the wall. >>>More

The tap water pipe under the bathroom floor tile was drilled a hole, which is not easy to replace, h
2 answers2024-07-04

Hello, a hole has been drilled in the water pipe under the floor tiles, and there is no other way but to dig out the water pipe and replace it with a section of pipe.

Bathroom pvc sewer pipe drill bit drilled a small hole how to repair
1 answers2024-07-04

Directly use two-component glue for repair, such as AB glue, agricultural machinery glue, stone glue and so on.

Can there be a hole in the toilet sewer pipe that can be plugged with asphalt, the hole is in the ce
2 answers2024-07-04

This hole doesn't actually need to be blocked. This is a sunken bathroom, and the sunken toilet needs to be drained twice. The following treatment methods can be considered, dig the cement layer around the nozzle down, use a 25-line pipe to connect a 90-degree elbow into the main pipe, the elbow is facing down, and then pour the hole with the plugging king, and the line pipe of 25 needs to be above the plugging king, so that the secondary drainage port can be made.

The upstairs renovation drilled a hole in the downstairs bathroom, and required the upstairs to be r
2 answers2024-07-04

Then he'll get it for you. That doesn't need to be notarized. One.