-
Anonymous users2024-01-24It is best not to dismantle the insulation layer, especially the "yin", let alone remove the insulation layer, otherwise it will be very troublesome to condense and run water in winter. Even tiling is not impossible!
-
Anonymous users2024-01-23The outside is there, and the inside can be dismantled
-
Anonymous users2024-01-22It can be dismantled to make full use of the space.
If you want to seal the balcony, it's easy to do, just shovel it off. Because the function of the insulation layer is just to heat up and save energy, and balance the room temperature, if the balcony is sealed, there will be no such trouble. >>>More
According to the normal construction sequence, when doing external insulation, the main structure (including beams, plates, columns and walls, etc.) should have been constructed, and the basic layout of the house (including living room, bedroom, kitchen and bathroom, staircase, balcony, etc.) should have been finalized, and it is generally not suitable to make changes. However, for villa buildings, due to the high price and special customers, if there is a change in the requirements, the developer will require the design unit to change if possible according to the specific situation, but this change is very limited due to structural restrictions!
If it has been closed and is on the outer wall, it is unlikely that it will volatilize to the point of endangering your health. The key is that the fire protection requirements are not up to standard, and the products are used more.
It needs to be eradicated. Thermal insulation is generally divided into internal insulation and external thermal insulation, external thermal insulation is done on the exterior wall and open balcony wall, the material is generally extruded plastic board or thermal insulation mortar, the exterior wall has nothing to do with the interior decoration, if it is on the balcony, it is recommended to shovel off, otherwise the balcony wall is easy to fall off after the wall tiles, if it is paint, it doesn't matter.
The insulation layer should be shoveled off.
It is important to shovel off the insulation layer because the insulation layer is made of asbestos net and foam, it is not flat, and there is no other way to receive the moisture in the cement. >>>More