The area that needs to be sprayed with paint for furniture and doors is 100 square meters, how many

Updated on furniture 2024-07-01
5 answers
  1. Anonymous users2024-01-24

    It depends on how many coats of paint you put on, if you put it on many times, if you don't need it so much every time.

  2. Anonymous users2024-01-23

    7 sets of paint are a group of 5KG, right?? If it is, it must be 100 square meters of relatively 33 veneer panels, which is converted into a group of 5 boards, and your topcoat is still sprayed, so it can be said that the effect is not very good, and the amount of paint should be relatively small. The effect is also average, at least the paint film is not thick, especially if you buy a general paint solid content is relatively small.

    And isn't the base coat assignment a little wrong?

    He didn't cut the material, but stole some work, and with less paint, he could finish it early and pay early, didn't he.

  3. Anonymous users2024-01-22

    To use 7 sets, if you want to have a better effect, it is recommended to have 4 bottoms and 3 sides, because the topcoat is sprayed, so the dosage will be larger.

  4. Anonymous users2024-01-21

    Almost. It may not be enough. In particular, the primer is thicker, the topcoat feels and looks good, but I am afraid to take the good paint to sell. And then do the bad work.

  5. Anonymous users2024-01-20

    Don't be suspicious of people and don't use people who are suspicious You understand.

Related questions
Is car paint the same as furniture paint?
6 answers2024-07-01

If the spraying method is the same! But:

The composition of car paint is different, and the ingredients are much more than furniture, and the requirements are a little higher! It can be exposed to the sun and rain! >>>More

What color paint does doors, windows and furniture spray look good
3 answers2024-07-01

Tone it down a bit, and the specific process is as follows: varnish process (three bottoms and two sides or three bottoms and three sides). >>>More

How to putty for wooden furniture and how to spray paint I made newly
1 answers2024-07-01

And putty: use white talcum powder, add a small amount of varnish and stir into a paste, pay attention to the varnish do not put too much, putty should be viscous, just like dumplings and dough. Generally, putty does not need to be colored, if you want to add color, just add a little, and the color of furniture wood is basically the same. >>>More

Which is better, furniture decoration spray paint or laminated film?
2 answers2024-07-01

Hello, the membrane pressing board is made of MDF as the base material, PVC membrane skin vacuum absorption, integrated molding does not need edge banding, wear-resistant and dirt-resistant, easy to clean, can be modeled. It is generally used in European style and pastoral style, antique style. The cost is relatively high. >>>More

Decorate the furniture paint is better to brush or spray
4 answers2024-07-01

The painting effect is good, but the material consumption is large and the environmental requirements are high. The paint is the protective layer of the base layer, and the polishing process only removes the defects of the paint, and there is no need for defects. There is no polishing process for the last covering.