-
Anonymous users2024-01-24There are 150 200 250 280 spacing, but not every toilet manufacturer will produce these spacing under 300mm. In the toilet of sanitary products, these pit spacing below 300mm is not in great demand, and belongs to special pit spacing. Generally, fewer brands will produce or have inventory.
You can only resell and buy a new one, which will be troublesome in the future if you need to shift, leaking, poor flushing, etc.
The flush effect makes no difference!
The pit of the toilet refers to the distance between the wall and the drain of the toilet, now there are generally 300mm and 400mm, the original 290mm, the foreign pit is not the same as the domestic standard, the size of the pit distance and the quality of the toilet has nothing to do with it! >>>More
The pit spacing is the distance between the center of the toilet drain and the wall.
The general sanitary ware has two mouths, both can be used, you can find a professional installer to install it, open the 300 opening, the professional have tools, and then plug the 400 with the material drilled down when the 300 is dipped with glue on it, you can seal it with marble glue, you generally can't do it yourself, you have to find a professional master.
As long as the position of the plaster is accurate, there is no problem, I will give you an idea, use a hard paper, more than 200 grams of paper is the best (a little thicker), roll it into 300mm and then put it on the 400mm drain, the plaster is hit on the periphery of the paper and the middle of the drain, and use this as a benchmark to hit the plaster. In order to increase adhesion, it is best to apply some adhesive to the place where the plaster is applied, no problem.