What to do about kitchen sink holes

Updated on Kitchen 2024-07-26
4 answers
  1. Anonymous users2024-01-24

    Clause. 1. Usually, the clogged sink is mostly due to the accumulation of debris at the U-shaped bend of the sewer pipe, resulting in poor drainage. If it is a sewer pipe with a sewage screw, remove it directly (to prevent staining the cabinet, it is best to pad a sewage basin at the bottom), after removing, dredge it with iron wire and steel wire, and it should be able to solve it smoothly.

    If it has not been solved, it may be necessary to remove all the sewer pipes, remove all the plastic connections, rinse them, and reassemble them, which I believe will not take more than 30 minutes to complete.

    Clause. Second, the kitchen sink sewer pipe is often blocked by greasy debris, vegetable residue, before dredging, you can first introduce a pot of boiling water into the sewer pipe, and then use a rubber pipe hook to extend into the sewer pipe to remove debris. If you live on the first floor, it may be a pile of fallen leaves or silt.

    Clause. 3. Prepare a rubber pipe, not too long, as long as it can connect the tap water faucet and the sewer pipe. Insert one end of the pipe into the mouth of the sewer pipe, plug it tightly with a worn rag or towel around it, then turn the water tap to the maximum, flush for two or three minutes, and the sewer pipe can be dredged.

  2. Anonymous users2024-01-23

    Call someone to make up for it. Or plug it yourself.

  3. Anonymous users2024-01-22

    The flood surged. The journey of the sun and the moon, if out of it; The stars are splendid, if they are out of it, they are even lucky, and they sing to their hearts.

  4. Anonymous users2024-01-21

    To work, you'll need a Bondi Band-Aid.

    When water leaks, you'll need a strong repairman.

Related questions
1 answers2024-07-26

The edge of the hole is sewn with a sewing needle first, and after completion, the sewing needle is sewn in a grid shape at the hole, and the density can be larger. >>>More

9 answers2024-07-26

1. If there is a leak in the gap under the sink bolt, you need to loosen the screws of the faucet with a tool, remove the screws, tie heads, and glands, take out the triangular gasket in the gland, and replace it with a new triangular gasket. >>>More

6 answers2024-07-26

The new home has not been lived for a long time, and the use time of the countertop is within the warranty period, and the countertop of the counter is broken, so you can contact the merchant directly. Generally, regular brand cabinets, merchants have a good after-sales service system. After the countertop is broken, it is relatively not difficult to repair, consumers should protect the 'wound' at the fracture at home, do not let it continue to break, keep the 'fine stubble', and call the merchant to repair. >>>More

1 answers2024-07-26

Sink, leakage: is the tank leaking or the side leakage, the tank is leaking, you can only replace the new sink, if the side is leaking, re-strengthen the sealing operation. >>>More

1 answers2024-07-26

The problem of the waterproof layer is the most troublesome thing, you must remove the tiles, hit the wall to the waterproof layer, scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles. Be sure to check whether the waterproofing is not done well before proceeding.