How to waterproof the location of the toilet in the toilet?

I recommend that the application with a two-component polyurethane waterproof coating is the best. Because of good water resistance and strong adhesion.

Try to avoid ground pipes during construction. When you have to walk the pipe from the ground, you must do waterproofing once before you run the pipe, and do waterproofing again after the cement mortar is plastered.

Try to avoid glaring in the wall. For some hardware such as towel rods, the thickness of the hole in the wall should not exceed 2 cm, otherwise it is easy to damage the waterproof layer of the wall. When the pipe must be grooved in the wall, the inner wall of the tank should be carefully coated with waterproof material to prevent condensation from seeping out of the wall in the future.

Do not change the design of the pipes at will, otherwise it is easy to cause water leakage in the future. First, do not move water supply lines over long distances. The longer the pipeline, the greater the chance of failure. Second, do not change the location of the toilet at will, otherwise it is easy to leave hidden dangers for future leakage.

The dark corner of the bathroom should be treated with one or two layers of reinforced polyester cloth joints to prevent the waterproof layer from cracking and leaking. In addition, the pipe connection can be used to build the riser with lightweight bricks, and the dark corner of the riser should also be paved with non-woven fabric to prevent water seepage.

In order to avoid water leakage in the corners of the wall, the order of laying the wall tiles and floor tiles in the bathroom should be strictly observed. The wall tiles should be laid first, leaving the last row near the ground without paving, and when the waterproofing and floor tiles are all paved, after reaching the wall, the remaining wall tiles should be laid.

The waterproofing of the corners of the wall and the root of the pipe should not be made flat, but should be made in an arc. In addition, the gap between the floor drain and the tile, the connection between the floor drain and the pipe, the flange of the toilet and other details should be dealt with.

Yuxiang waterproof] supply materials and construction.

1.It is best to choose waterproof cement, although the price is more expensive, but its performance is excellent, which can reduce the probability of leakage. When solving the problem of pipe root leakage, intumescent materials should be selected to achieve the purpose of plugging leakage, and cement should not be used instead.

1.Try to avoid ground pipes during construction. When you have to walk the pipe from the ground, you must do waterproofing once before you run the pipe, and do waterproofing again after the cement mortar is plastered.

2.Try to avoid glaring in the wall. For some hardware such as towel rods, the thickness of the hole in the wall should not exceed 2 cm, otherwise it is easy to damage the waterproof layer of the wall.

When the pipe must be grooved in the wall, the inner wall of the tank should be carefully coated with waterproof material to prevent condensation from seeping out of the wall in the future.

3.Do not change the design of the pipes at will, otherwise it is easy to cause water leakage in the future. First, do not move water supply lines over long distances. The longer the pipeline, the greater the chance of failure. Second, do not change the location of the toilet at will, otherwise it is easy to leave hidden dangers for future leakage.

4.The dark corner of the bathroom should be treated with one or two layers of reinforced polyester cloth joints to prevent the waterproof layer from cracking and leaking. In addition, the pipe connection can be used to build the riser with lightweight bricks, and the dark corner of the riser should also be paved with non-woven fabric to prevent water seepage.

5.In order to avoid water leakage in the corners of the wall, the order of laying the wall tiles and floor tiles in the bathroom should be strictly observed. The wall tiles should be laid first, leaving the last row near the ground without paving, and when the waterproofing and floor tiles are all paved, after reaching the wall, the remaining wall tiles should be laid.

6.The waterproofing of the corners of the wall and the root of the pipe should not be made flat, but should be made in an arc. In addition, the gap between the floor drain and the tile, the connection between the floor drain and the pipe, the flange of the toilet and other details should be dealt with.

7.The waterproofing of the bathroom should be made in the shape of a basin instead of a dustpan, which not only drains the water from the surface of the floor tiles, but also introduces the floor drain that leaks into the structure of the building.