-
Anonymous users2024-01-24We are also engaged in three-in-one manufacturers, the main customers for custom wardrobe customers, such as need to know, private message.
The problem of the lock can not be too thin, it is best not to be cheap, and the poor opening arc and height can not meet the requirements. If the rod is too short, you can't hook it, so no problem, the rod is too long because of the locking hole. Therefore, in the case that the problem of the rod is not there, it is the problem of the lock, if the working principle of the buckle hole you know the words will understand, the opening of the buckle has to be an arc, there is a straight, straight hook half. >>>More
The three-in-one is composed of three bais: the three-in-one duyi is equivalent to the nail and the groove falcon dao structure in the traditional carpentry. They are three parts: eccentric head back (also known as eccentric answer nut, eccentric wheel, eccentric piece, etc.), connecting rod (bolt), and embedded nut (bulging, commonly known as plastic particles). >>>More
The three-in-one connector is to realize the connection of plate and plate, which is divided into eccentric wheel (also commonly known as flatbread), screw, nylon nut, and the size can choose different sizes according to the customer's process.
Furniture three-in-one connector eccentric head damage is very easy to replace, first of all, to see whether the eccentric piece can still rotate normally, if it can rotate normally, use a screwdriver to put the arrow of the eccentric part cross towards the butt plate, so as to see if the two plates have signs of loosening, if so, the eccentric piece can be removed. If the eccentric part has been damaged and cannot be rotated, use other tools to remove the eccentric part and replace it with a new one.
Go to the tool shop and buy a carpentry drill bit that comes in different sizes.