How to remove the 502 glue traces on solid wood furniture without harming the paint of solid wood fu

Drop 502 in place to melt the original 502, and then quickly wash it off with water, very smart! 2. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly. 3. The same solution can be washed.

502 glue is a kind of resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

Stick 502 glue on a small area, just soak it in hot water, if a large area is stained with 502 glue, apply acetone, and wait about 5 to 10 minutes to remove.

1 Drop 502 in place to melt the original 502, and then quickly wash it off with water, which is very good! 2. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly. 3. The same solution can be washed.

502 glue is a kind of resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

Stick 502 glue on a small area, just soak it in hot water, if a large area is stained with 502 glue, apply acetone, and wait about 5 to 10 minutes to remove.

502 glue is a kind of resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

Stick 502 glue on a small area, just soak it in hot water, if a large area is stained with 502 glue, apply acetone, and wait about 5 to 10 minutes to remove.

Use banana water to drop on the glue stains, and at the same time use an old toothbrush to stir constantly, until the glue stains become soft and take off, then rinse with water, brush repeatedly, and brush until clean. Put an absorbent cloth on the back of the garment with glue marks, then apply some white vinegar to the glue marks, and finally scrub it clean with cotton dipped in water.

Acetone, gasoline, sesame oil, etc., poured some insulating oil from the transformer on the hand, and the 502 glue quickly softened and finally rubbed off.

1. You can drop 502 on the original place to melt the original 502 and quickly wipe it off with a damp rag.

2. The insulating oil in the pouring transformer is on the table, and the 502 glue will quickly become soft, and then it can be rubbed off.

Glue is a kind of resin glue, which can be used with an organic solvent that dissolves the resin, such as acetone. However, inhalation of acetone is toxic, so please be careful when using it.

Take a very fine sandpaper, polish it flat, polish it, and spray it with varnish.

If you have to remove it, then you have to repaint, so you should be careful and careful in your purchase.

Summary. 1. Insulating oil.

I can't think of what kind of oil it is when I see this name, in fact, it is the oil in the transformer, the role of this oil in the glue is still quite large, it can quickly soften the glue, and the method of use is also very simple, only need to drop a few drops of insulating oil in the place where the glue is solidified, and then wait for a minute or two to wipe it off with paper, so the solidified glue has been softened by the insulating oil, and the paint will not be removed!

How to remove the 502 glue traces on solid wood furniture without harming the paint of solid wood furniture

1. When I saw the name, I couldn't think of what kind of oil it was, in fact, it was the oil in the transformer, and the role of this oil in the glue was quite large, it could quickly make the glue soft, and the method used was also very simple, only a few drops of insulating oil needed to be dropped on the place where the glue was solidified, and then it could be wiped off with paper after waiting for a minute or two, so the solidified glue has been softened by the insulating oil, and it will not get rid of the paint Zhaoku's fingers!

2. We all know that it is the nemesis of nail polish, which is specially used to clean nail polish, but it is also completely okay to use it to clean up the glue, not only clean up, but also will not leave any traces on it, all in all, it is very good, I only need to prepare a cotton swab, take it and wipe it in the glue, and then you will find that the glue is immediately removed! Therefore, the solution of this method is very fast.

3. Vinegar with vinegar can also be a good solution to this problem, and the principle is to rely on the acidity of vinegar, the same is to prepare a cotton swab, and then dip a small amount of vinegar, smear it on the glue hole, and then wait for the glue to disperse, you can easily remove it, but remember to use a cotton swab to scrape back and forth on it can be removed!