-
Anonymous users2024-01-24It's easy to stick flat furniture! First of all, the surface of the furniture to be pasted with veneer is flattened, brush the first white latex (there is also a special glue for veneer) and wait for the glue to dry, brush the second time, and then wait for the glue to be semi-dry, and place the veneer flat on the furniture that has been brushed with glue, ((There is a key point here, that is, each piece should be pressed on top of the previous veneer, that is, as long as the edge of the two veneers is 2 4 cm overlapped!) Smooth the veneer by hand without wrinkles, and then use a sharp blade such as a carpentry knife to cut it with a sharp knife or blade in the middle of the overlapping part of the veneer with the veneer.
Take out the excess and finally iron it with an iron! It is required that there are no pores, no wrinkles, and then sanded it with sandpaper. The edges and corners have lines and the operation is the same, but it is more difficult.
-
Anonymous users2024-01-23There are several ways to veneer the board:
The large-scale factory uses urea-formaldehyde resin glue + hot press method, and the paste effect is the best;
Smaller factories use white latex + cold pressing, and the effect is worse;
On-site carpentry is generally directly pasted with all-purpose glue, and the effect is not good.
-
Anonymous users2024-01-221. Smooth the surface of the furniture to be veneered;
2. Brush the white latex for the first time;
3. After waiting for the glue to dry, brush it for the second time, and then wait for the glue to be half dry, place the veneer flat on the furniture that has been brushed with glue, smooth the veneer by hand, without wrinkles, and use a sharp blade such as a woodworking knife to cut it with a sharp knife or blade in the middle of the overlapping part of the veneer and the veneer, and remove the excess part.
4. Iron with an iron! It is required that there are no pores, no wrinkles, and then sanded it with sandpaper.
-
Anonymous users2024-01-21Veneer depends on the thickness, veneer variety, whether the processing of non-woven fabric or kraft paper, whether there is adhesive backing, the specific problem operation is different! Feel free to ask!
1. Different properties: Solid wood doors are made of wooden doors, which are mainly made of natural logs from the forest, and are scientifically processed through a series of complicated processes. Most of the solid wood composite doors are made of pine and fir as the door core, and the MDF or solid wood veneer is pasted outside, and then pressed by high temperature, and the edges are sealed with solid wood lines. >>>More
There are several ways to distinguish this: sound, weight, and the position of the edges; >>>More
After passing the product characteristics of the current furniture market, you can choose what you need. >>>More
Very easy. The layman looks good at the veneer, and the wood splicing is more flowery with solid wood.