-
Anonymous users2024-01-24Hello! This is mostly due to the change in the adjustment position of the float, and the connecting rod cannot completely close the inlet valve. Open the lid of the tank and observe that if the water has overflowed the overflow, you can adjust the float linkage.
The drain valve is not closed tightly and the water leaks, so that the float cannot be lifted to the position, and the drain valve is treated. There is no problem with these, but the rubber cap of the water inlet is broken or the water inlet pipe in the box is leaking.
-
Anonymous users2024-01-23Check for water leaks.
First, the flushing method.
Nowadays, most toilets on the market are siphoned, which is easy to flush off the swag that adheres to the surface of the toilet. The disadvantage is that it is water-consuming and easy to block. It is not easy to clog directly and is easy to smell when it is disadvantaged. >>>More
The toilet fittings in the picture are called drain valves, also called water valves. >>>More
In the standard toilet of large civil aircraft, after the passenger is "convenient", after pressing the button, a small amount of water will flow out of the toilet wall, and some also add septic agent to play the role of dilution and scouring, and at the same time, the huge vacuum suction will suck the feces into the two-layer structure of the "fecal tank" carried by the aircraft, and after reaching the ground, the feces will be stored and processed by the special fecal storage vehicle. >>>More
Different dynasties had different ways of dealing with manure. Before explaining how the ancients dealt with filth, I suggest that if you have crossed over and want to go to the toilet properly, then the Qing Dynasty chose the Han Dynasty including after the Han Dynasty. Before the Han Dynasty, please do not travel at will. >>>More
If there is a professional design, it can be constructed according to the drawings.