-
Anonymous users2024-01-24Select a submersible pump. An inch or an inch and a half is enough. Head, which can generally meet your requirements.
Brand well, don't save money. The insulation of the motor is very, very important; At the same time, the distribution line should be leaked insured!
Actually, I don't think this is particularly troublesome, you can use it in the process if you follow the regular installation procedure.
Drainage lift pump is generally installed two, one standby and one with two is appropriate, to avoid delay in drainage, if the space is limited, you can use one, but the storage pit is better to be larger, otherwise the pump will start frequently
1 The average bathtub needs at least 100 to 150 liters of water, so your 16-liter water heater can only be said to be barely enough for the bathtub (the water time is longer than the customary time), but it does not affect the use. However, it is not advisable to use hot water at the same time when the bathtub is watered. >>>More
Because the sewage lifting device in the toilet is very advanced.
The working principle of Zede microboy household sewage lifter is that after the sewage of the bathroom enters the sewage lifter through the inlet pipe of the sewage lifter, the pneumatic pneumatic level switch in the household sewage lifter should push the pressure in the controller to rise and promote the controller to work, and then turn on the power supply of the sewage lifting pump, after the sewage lifting pump power is turned on, it will automatically run for sewage lifting and discharge, and the sewage in the sewage lifter is transported to the designated place through the sewage lifting pump. When the float falls down after the liquid level is lowered, the sewage lift pump will automatically stop running, and the relatively large solid impurities in the sewage will be cut into fine particles by the cutter of the sewage lift pump and discharged along with the sewage.