-
Anonymous users2024-01-24The blackening of the solid wood floor is a common floor problem in the current humid rainy season, the reason is that the floor is not resistant to corrosion, the humidity under the floor is larger, the long-term ventilation is not smooth, and the wood mildew caused by the humidity becomes the result of the corrosion of the wood rot fungus on the floor. The most negative approach is ventilation, which excludes moisture. Dark spots caused by exposure to chemicals are not related.
-
Anonymous users2024-01-23Is it moldy in the damp? The landlord uploads a photo of the black-faced floor to see, so that you can determine how to solve it.
-
Anonymous users2024-01-22The reason why the solid wood floor becomes "blackface" is: the use of non-corrosion-resistant flooring, and the dampness under the floor, long-term poor ventilation, causing mold and discoloration of the wood. After a long time, it will also cause the floor to arch, and in severe cases, granular black or yellow spots will appear on the board surface.
It is most likely to occur on dry light-colored floors such as catop, ash, etc. The most negative approach is ventilation, which excludes moisture. It is also possible to disassemble the floor, dry it, solve the damp problem and then re-pavement.
-
Anonymous users2024-01-21The paint on the surface of the hardwood floor is oxidized and the color becomes darker.
-
Anonymous users2024-01-20The paint on the surface of the hardwood floor is oxidized and the color becomes darker. How long has it been using? If it's like this for a year or two, you have to ask about the quality of the product.
Bell Floor, Home, The Beginning of Dreams].
-
Anonymous users2024-01-19Your home is leaking and the wooden floors are damp.
-
Anonymous users2024-01-18What do you mean by blackface?? Moldy? The floor is darkening?
A Fixed is not true.
B The ground is uneven. >>>More
It stands to reason that parquet should be more expensive than solid wood, because it is all solid wood, and the process of parquet is more complicated under the same thickness. Some layers of domestic parquet are made of poorer wood, but the name is named after the better layer of wood, so the price is cheaper than a whole piece of solid wood flooring that is good wood.
There are usually two causes, one is caused by moisture. That is to say, before installation, the floor was not cleaned, there were some small sally, or the floor was too rough. Therefore, after the installation of the floor, when we walk on the wooden floor, the moisture-proof film of the wooden floor and the balance layer on the back of the floor will be destroyed, and the moisture of the ground will enter and cause the floor to bulge. >>>More
1. The multi-layer dough sheet of solid wood is thin so cheap, and the whole piece of solid wood is so expensive. >>>More
If you want to completely solve this problem, you should reinstall the floor, so that you can solve this problem, after the solid wood floor is laid, if you step on a foot somewhere and then step on it, continue to think, it must be that the wooden mortise and the floor wooden tenon is not fixed, if the wooden tenon material is too soft and not difficult, it will also be pulled up by the ground dragon to cause the floor to have a sound, so re-laying is the best way.