-
Anonymous users2024-01-24It is necessary to look at the amount of exhaust gas output, and after the on-demand customization, the EIA needs to be stable if it reaches the standard, and technical support is very important.
-
Anonymous users2024-01-23The main components of the organic waste gas produced in the process of baking paint in the furniture factory are benzene organic compounds and formaldehyde, according to the air volume of the site to judge whether to use photo-oxygen catalytic equipment or RTO combustion equipment, generally small furniture factory photo-oxygen equipment can efficiently remove organic waste gas, we recommend the use of spray tower pre-treatment of the waste gas, the residual waste gas after washing by the photo-oxygen catalytic equipment for further treatment (under normal circumstances, the purification efficiency after the treatment of photo-oxygen catalytic equipment has reached 97%). Yuanyan recommends that you carry out activated carbon adsorption treatment after the photo-oxygen equipment, and the treated gas is discharged into the atmosphere through the fan. After a large number of cases, this solution can completely and effectively treat the paint exhaust gas of the furniture factory.
Thank you for adopting.
Ventilation, scrape out directly, if you feel that there is pollution to the environment, then you can do waste gas treatment equipment, the premise is to have strength. It seems that the environmental protection department still has subsidies, you can go to the local environmental protection department to ask!
The general enterprise is unable to solve the exhaust gas produced by the paint, foreign companies have a special gas burner to burn the exhaust gas and then discharge, the cost is very expensive, there is the original foreign company when the company has that set of equipment, but it is rarely used (can't afford it, the cost of a day is more than 30,000).
Hello, I will probably tell you that according to the requirements of environmental protection, the purification of paint exhaust gas includes the purification of paint mist (particulate matter) and the purification of VOCs such as toluene, xylene, and non-methane total hydrocarbons. At present, the paint exhaust emission standards in most areas of China implement the current national "Air Pollutants Comprehensive Emission Standards" (GB16297-1996) secondary standards, but the "Air Pollutants Comprehensive Emission Standards" (GB16297-1996) have been implemented since 1996, more than 20 years ago, and the indicators have not been able to meet the requirements of the current social and environmental development. At present, local standards have been issued in various places, such as Shandong Province put forward the draft of "Volatile Organic Compounds Emission Control Standards for Industrial Enterprises", Hebei Province local standards "Volatile Organic Compounds Emission Control Standards for Industrial Enterprises" (DB13), Tianjin local standards "Volatile Organic Compounds Emission Control Standards for Industrial Enterprises" (DB12 524-2014), and various exhaust emission indicators have been greatly improved. >>>More
The bag filter is composed of an upper box, a bag chamber, an ash discharge device and a pulse jet ash cleaning control system. The inside of the dust collector is divided into two parts by a pattern plate. The upper part is called the upper chamber or clean air chamber. The following part is called the bag chamber or filter chamber. >>>More
With Shenyaneng environmental protection paint mist recycling machine, if it is oily paint, it can be purified and recycled, but it cannot be recycled; It is UV paint and paint that does not dry can be recycled and recycled.