What s going on with the toilet flushing is not working

1. The toilet itself has insufficient pumping power and insufficient water pressure: adjust the screw of the inlet valve clockwise to make the water level rise, and pay attention to the water at least 10mm away from the overflow nozzle of the drain valve. Adjust the water level of the tank appropriately.

If it is a slow flow from the water tank to the toilet, check whether there is something blocked from the toilet tank to the flushing outlet.

2. Problems such as insufficient flushing water and water outage: If the water volume is insufficient, you can remove the lid of the water tank and adjust the water volume. There are two plastic rods under the toilet water button, and there are cocks on them to adjust the length of the plastic rods to control the amount of water.

Common causes of toilet flushing weakness:

1. The side handle chain of the side press and side wrench toilet is long, which causes the water stop pad to stop the water quickly, although it has action. Solution: Please shorten it to the appropriate level.

Or the top press bar of the top press toilet is low, resulting in the water stop pad moving but quickly stopping the water. Solution: Open the water tank cover, reverse, loosen the pressure rod nut, and adjust the length of the pressure bar to the appropriate one.

Second, the water level of the inlet valve is low, resulting in weak water outlet.

The solution is to remove the inlet valve and remove the inlet valve buckle. Turn the inlet valve body counterclockwise. Then increase the height of the body accordingly.

Then rotate the inlet valve body clockwise and attach the buckle. Finally, install the inlet valve. Connect the filter and water inlet pipe, and the fault can be eliminated.

3. Ceramic hanging pollution:

The ceramic glaze of the toilet bowl is not smooth enough, which is easy to hang dirt, and it will also cause the flush to be unclean.

1. If there has been a similar situation, it is a product quality problem and the glaze material is not good, so let the merchant come to deal with it.

2. In the past, it could be cleaned, but now if it can't be cleaned, clean it frequently, and don't use too corrosive washing liquid, which will damage the ceramic glaze and make it easier to hang dirt in the future.

Fourth, the solution of ceramic hanging pollution:

In general, it is good to brush directly with a toilet brush. If it is always easy to get dirty, a good toilet with ceramic glaze is better, use cheap toothpaste, be careful to be white, not the transparent kind, and then scrub with the green or blue rough side commonly used for dishwashing. If you haven't cleaned it for too long, you can use a steel wool ball to gently wipe it first.

However, the use of steel wool balls and decontamination powder will damage the ceramic glaze, so it is recommended not to use it.

Don't rush to fix the toilet flush, move this small mechanism to solve it easily, the method is super simple.

The toilet flush is weak, don't worry about finding a master to fix it, twist this small mechanism to try, the method is awesome.

Toilet tank flushing weakly? Hurry up and adjust this place, and it will be unobstructed in no time!

Check that the toilet tank is filled with water every time, and press everything in it with your hands. Check the toilet for slight blockages in the pipes leading to the sewer and poke them a few times with the toilet plug.

This is what I said when I first bought it:

1.You bought a siphon toilet, and because the hole spacing is not suitable, it has been displaced by 2There are two reverse bends, one for the toilet and one for the sewer pipe.

It was a long time before that, 1The sewer pipe is not good and may be blocked;

2.There is dirt inside the tank and it needs to be cleaned up;

3.It is possible that the pipes are not glazed, and the pipes are clogged due to long-term fouling.

If it is within the warranty period, it is recommended to find the manufacturer to test it and solve it according to the actual situation.

Poor toilet flushing can be due to several reasons:

1.Insufficient water level in the water tank: Check if the water level in the water tank is sufficient, if it is insufficient, you need to add water.

2.Toilet drain blockage: If the toilet drain is blocked, the water flow is not smooth, which affects the flushing effect. It can be cleaned using a toilet deodorizer and if the removable drain is not addressed.

3.Flush valve family guess not opening or closing properly: Check if the flush valve is clogged and the control valve is out of order. If a problem is found, replace it with a new one.

4.Insufficient water supply from the water pipes: If the water pressure is too low or the water supply pipe is too small, the toilet is not flushing enough. You can check the water pressure or use a booster pump to solve the problem.

5.Sediment or dirt accumulation: Sediment or dirt accumulation in the toilet bowl may cause the Zhaofan to flush poorly or completely fail to flush the car. You can use a toilet bowl cleaner to remove impurities, or disassemble the toilet bowl to clean it.

In daily use, it is recommended to maintain the toilet, clean and inspect the maintenance in time to avoid the problem of poor toilet flushing.

Hello, I have seen your question and am sorting out the answer, please wait for a while The first reason is that the toilet itself is caused by insufficient pumping power and insufficient water pressure, at this time you need to adjust the water level of the water tank appropriately, and carefully check whether there is any foreign object blockage from the toilet tank to the flush outlet; The second reason is that the amount of flushing water is not enough and there is a water outage, so you need to remove the water tank cover and adjust the amount of water appropriately.