The entrance door of the hall is paved with a little slope, okay?

The diagonal paving method is to arrange bricks at an angle of 45 degrees with the edge of the wall, which is relatively costly and labor-intensive. When the antique brick is paved obliquely, it is best to leave the gap wider (between 3 and 8 mm). The oblique paving method visually turns the original square brick into a diamond shape, which will not be rigid and more atmospheric, as shown in the figure below.

However, the oblique paving method is more expensive to use floor tiles, take the 600*600s bricks as an example, more than 15% of the ordinary paving method, and the paving cost exceeds the ordinary paving method by about 50%, which is about 40 50 yuan per square meter. If the floor tiles of your home are 800*800 large bricks and bright bricks, they are generally not obliquely paved; Small bricks like 600*600 can be paved diagonally, so the effect is better.

However, from a personal point of view, it is not recommended that the floor tiles in the living room be paved obliquely, mainly because the area is too large and the oblique paving of the place where you often stay is not good-looking and messy. On the contrary, temporary places such as aisles, balconies, and hallways are paved diagonally, but they should be treated with waveguide wires.

It's okay if you don't slip and trip when you walk up, and if you have time, you can also re-fix it, which is safe and beautiful.