The builder left the position of the ceiling light in the living room crooked, and how to remedy the

Updated on Living room 2024-07-04
3 answers
  1. Anonymous users2024-01-24

    If the position deviation of the wire box is not large, it can be covered by a larger ceiling lamp. If the chassis of the lamp is really not covered, you can design the lamp pool in the center to cover it, and walk the flying line inside the modeling.

  2. Anonymous users2024-01-23

    It should be a quality problem, first contact the DU developer to solve, although it has been delivered, DAO is still in the warranty period The developer should be responsible.

    Copyrighted; Right.

    If it's just a little bit of a problem with the position of the lamp, it can be changed when decorating. Let the decoration master chisel out the threading pipe from the wall and re-bury the threading pipe according to the actual situation of the living room, and at the same time smooth the original excavation position with mortar.

  3. Anonymous users2024-01-22

    It depends on the size difference.

    How much, the difference is very little, if you choose the ceiling lamp in the future, you may be able to block it; If it is much worse, it should be changed to the center of the living room, and the wire pipe can be slotted on the floor to thread to the correct position, or use the yellow wax pipe, the depth required can be smaller, and then the wire duct is flattened with cement powder, which meets the basic requirements of latex paint in the future.

Related questions
The location of the ceiling light installation in the living room
3 answers2024-07-04

Precautions for the installation location of the ceiling lamp: >>>More

Is there any attention to the installation location of the ceiling light in the living room?
1 answers2024-07-04

The installation location of some living room chandeliers is determined according to the style or size of the ceiling lamp. There are also these places to consider: >>>More

The position of the ceiling light in the living room of the buried wire is wrong, and its position s
1 answers2024-07-04

There are N ways to do it:

Re-groove and connect the wires; >>>More

On the second floor of the self-built house, the living room wants to be about 2 4 meters away from
3 answers2024-07-04

Iron. In fact, wooden guardrails are more coordinated. I hope my answer can help you.

There is a beam in the living room of the self-built house, how to decorate it, and hide it
1 answers2024-07-04

It is recommended to set up a beam in the middle, after all, the second floor has to be a wall, the force is relatively large, if you are really unwilling to set up a beam, the general consideration is mainly for future decoration and beauty. The thickness of the plate can be set to 150, and the middle part is set with a dark beam, the dark beam is 400 * 150, and the steel bar is 4C18 up and down, which is also possible.