How to connect the bathroom saw iron pipe with the plastic pipe

Updated on Bathroom 2024-07-27

1 answers

Anonymous users2024-01-24

You can use a threaded fitting to connect it. If you find a plumbing master, you can solve this problem for you.

Related questions

Water seepage at the joint between the cast iron pipe and the PVC pipe in the bathroom is a sewer pi

3 answers2024-07-27

I am from Jinyang Pipeline, it is best not to use a plugging agent, because the leakage point has always existed, so it can be replaced with the safest repair.

What should I do if there is a leak between the iron pipe and the plastic pipe in the bathroom?

4 answers2024-07-27

It is necessary to buy a reducer and a PVC pipe fitting.

1. You can use a reducer to put into the cast iron pipe of the lower building, and after the contact is good, seal it with sealant at the place of contact. >>>More

The plastic pipe in the bathroom passes through the iron pipe, and there is a gap between the two, a

5 answers2024-07-27

In this case, like you said, it is unlikely to be blocked, only to change a PPR hot water pipe. I think it would be better that way!

What can be used to stick the surface of the polished tile in the bathroom with the plastic pipe

1 answers2024-07-27

With a pipe clip, the clamp is glued to the brick with glass glue on the clamp pipe. Use transparent glue to fix the clips and pipes on the bricks for a day, and when they are dry, they are fixed and very strong.

Leaking PVC sewer joints in the bathroom

2 answers2024-07-27

The PVC pipe joint is also a place that is easy to seep water, and the re-melt pipe will be short, and it needs to be replaced again if it cannot be satisfied.