-
Anonymous users2024-01-24Labor cost 80 per square meter. Construction method: welded steel structure, aluminum veneer, specific check specifications.
-
Anonymous users2024-01-23Labor cost 80 per square meter.
Steps: Pre-check the concealed items in the roof - leveling and pay-off - installing the boom - installing the counter-support or conversion layer - installing the hole angle keel - installing the J-groove keel - pulling the wire to correct the straightness - installing the aluminum veneer.
-
Anonymous users2024-01-22If you're contracting out, it's 70-80 per square meter. Glue-free. The steps are: Welded keel. Upper veneer. Glue acceptance.
-
Anonymous users2024-01-21How much does it cost to light work on aluminum veneer ceilings.
Preparation for the installation of aluminum veneer ceilings >>>More
The elastic line is copied out of the horizontal point on each wall (column) corner in the room with a level meter (if the wall is longer, a few points should be copied in the middle), and the horizontal line is popped up (the horizontal line is generally 500 from the ground), from the horizontal line to the design height of the ceiling, the horizontal line is popped up along the wall (column) with the pink line, which is the lower skin line of the ceiling grille. At the same time, according to the ceiling plan, the position of the main keel is ejected on the concrete roof. The main keel should be divided from the center of the ceiling to both sides, the maximum spacing is 1000, and mark the fixed point of the boom, the fixed point spacing of the boom 900 1000. >>>More
1 construction process: boom - elastic ceiling elevation line - brush black paint above the elevation line - installation of water, electricity, ventilation pipes - installation of the perimeter mineral wool board ceiling - preliminary installation of metal grille - set the position and height of the ceiling arch - adjust the height of the fire sprinkler head according to the arch line of the ceiling - equipment debugging - adjust the metal grille according to the height of the arch - straighten the fire sprinkler head straight straight - install lamps and lanterns - fine adjust the grille straight straight. 2 Find the rules for the position of the ceiling plane: >>>More
Explanation of ceiling construction methods:
1. First fix the keel, and put a soundproof pad under the keel; >>>More
Preparation for the installation of aluminum veneer ceilings >>>More