The port of the water pipe behind the toilet is rusty and cannot be removed, what to do, how to remo

Updated on Toilet 2024-07-26
5 answers
  1. Anonymous users2024-01-24

    Wipe dry, apply evenly with some cooking oil, try to let the oil seep inside, and you can unscrew it off after a day.

  2. Anonymous users2024-01-23

    It is easy to unscrew with a wrench, pay attention to the direction and don't make a mistake, clockwise is tightened, counterclockwise is loosened. You try.

  3. Anonymous users2024-01-22

    Isn't it okay to take off the entire angle valve, and a corner valve will cost only ten yuan.

  4. Anonymous users2024-01-21

    Take a wrench, a spacer cloth, turn the valve a few times, and it will come down, and it would be nice to change it to a new valve, and a valve is not very much.

  5. Anonymous users2024-01-20

    If you can't take pliers and boards together, you can find someone who specializes in repairing.

Related questions
What should I do if the kitchen cabinet door screws are rusty and can't be removed?
2 answers2024-07-26

Spray it with rust loosening agent and then tighten the screws.

The bathroom sewer pipe is rusty, and if you want to replace it, you have to replace the entire six
6 answers2024-07-26

THE WALL THICKNESS OF THIS CAST IRON SEWER PIPE IS GENERALLY MORE THAN 3MM, AND THE SURFACE IS ONLY A LITTLE RUSTED IN THE PHOTOS YOU SEND, AND SOME OF THEM HAVE JUST REACHED THE ANTI-RUST PAINT LAYER, SO THERE IS NO NEED TO REPLACE THEM! >>>More

The drain pipe of the toilet is seriously rusted, and the rust knee can be used for several years
2 answers2024-07-26

This situation depends on the environment, keeping the outside of the pipe dry can generally be kept for 3 years, if it is wet for up to 1 year, it is recommended that you use anti-rust paint as a base, and then a layer of asphalt on the outside to waterproof. Hope it helps.

What should I do if the nails on my toilet seat are rusty
2 answers2024-07-26

Cut it off with a hacksaw and replace it with a new one.

I can't remove the toilet cover at home, is there any good way
1 answers2024-07-26

Generally, there are two nylon screws that connect the fixed part of the toilet lid to the lower part of the toilet body, and you will see that if you loosen the nylon nut, you can remove the toilet seat assembly. If you really can't find it yourself, then ask after-sales service to solve it, it won't cost much.