The lights in the kitchen at home and the lights in the living room are switched together, and at 6

Updated on Kitchen 2024-07-11
1 answers
  1. Anonymous users2024-01-24

    It doesn't matter if the living room and kitchen lights are not connected, this flickering depends on the light source of your lamp. Now popular LED lighting, the main reason for a flash, it is recommended to find a professional electrician to check whether your zero line of fire is reversed, that is to say, the lamp is controlled by the zero line, in addition, if it still does not work, you will find a professional electrician to do a repeated grounding for your lamps!

Related questions
Bedroom lights at home living room lights? Why the switch turned off the lights and looked on
2 answers2024-07-11

This problem is generally that the wire is reversed, that is, after you disconnect the switch, the live wire is still connected, but the neutral wire is disconnected. There are many LED lamps and lanterns that have this problem. Depending on where you bought it, this problem will not occur with good quality.

When replacing the living room lights, the segmented switches and LED lamp beads of the old lights w
1 answers2024-07-11

Replace the stepless drive and stepless remote control, and the wiring will be normal. Pair codes.

The living room light at home does not turn on the switch, and after turning on the switch, press th
3 answers2024-07-11

Either the light is broken, or the switch is broken; Disassemble it first and connect it directly with a wire, if the switch is broken, change the switch yourself.

Every time I turn on and off the lights in the living room, the lights in the bedroom have to flash,
1 answers2024-07-11

The wires are too thin and not done according to national regulations. The minimum wires of the state regulations are strictly forbidden to be used. >>>More

The switch of the light in the living room is broken, and the light does not go out when you press i
9 answers2024-07-11

The switch is short-circuited! The first aid method is to disassemble the switch, and the two-in-one is temporarily controlled with one! Of course, if you have time to go, hurry up and replace it!